Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.
This is where all the old posts go so they can still be used for reference and searched.
Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
Those that have installed a tranny cooler did you use any kind of sealer for the threads on the fittings? I know teflon tape ia a No No, but is there anything that is ok to use?
Permetex high performance thread sealent.
It comes in a white tube and works great. Used it on my trans cooler, and trans temp sensor.
It's a little pricy but a little goes a long way, and you'll have the stuff for years.