Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.
This is where all the old posts go so they can still be used for reference and searched.
Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
hard to say what it is but check your oil for metal your bearings may need to be replaced or there may be to much end play on your output shafts which means bearing are in need of replacement or the shift fork could be out of wack and the sliding gear may be grinding on it. good luck