• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Turn signal switch keeps breaking!

DeepC73

Full Member
Joined
Dec 25, 2020
Messages
224
Hello everyone,
I have installed three new turn signal switches in the last two years. They keep breaking; the plastic switch that is. What could be causing it. They still work (all lights and flashers work). However, after they break the blinker will not turn itself off after a turn. What am I doing wrong? Is there somewhere to buy a more reliable or heavy duty switch?
 

Slowleak

Bronco Guru
Joined
Sep 12, 2013
Messages
4,013
Loc.
Georgia
Are you using a stock steering wheel with the collar to trip the switch? Is it a one hump or two hump collar? Some aftermarket wheel hubs use a pin which can snag on the arm and break it.
 
Last edited:

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
There are two common threads to this problem.
One is that they break in the cold weather because the plastic is even crappier than the original stuff and doesn’t like the cold.
The other is that the shape of the modern release arm / canceling cam is slightly different and just like with the aftermarket steering wheels things snag on each other and snap the tips off.

I think James Roney did a write up on this recently like about a month ago or so.

And just in case you didn’t know you don’t have to replace the entire switch for that because that particular part is available separately.
Do you happen to have your original still laying around?
 
OP
OP
DeepC73

DeepC73

Full Member
Joined
Dec 25, 2020
Messages
224
There are two common threads to this problem.
One is that they break in the cold weather because the plastic is even crappier than the original stuff and doesn’t like the cold.
The other is that the shape of the modern release arm / canceling cam is slightly different and just like with the aftermarket steering wheels things snag on each other and snap the tips off.

I think James Roney did a write up on this recently like about a month ago or so.

And just in case you didn’t know you don’t have to replace the entire switch for that because that particular part is available separately.
Do you happen to have your original still laying around?
Thanks for the explanation. I don’t have the original anymore. It was beyond trashed when I replaced it the first time about two years ago. I’ll look into the one that’s in there now and see exactly where this one failed at. Hopefully I can just replace the “wings” on it. I’m getting pretty good at pulling the pins out of the connector if not.
 

BroncoJimbo

Contributor
Long-term owner
Joined
Jun 11, 2014
Messages
291
Loc.
North GA
Mine keep breaking too. In fact, in the 33 years I've driven my Bronco it has only had cancelling turn signals for a few months. And yes, it's the cheap, plastic white cancelling arms that break. I decided to bite the bullet and buy a higher quality Standard brand from Rock Auto. It was more expensive, but I was tired of replacing them. Well, the one I chose, # STM TW965 which is listed as a standard replacement for a 1976 Bronco is for a manual transmission, not an automatic. Just ordered the correct one from Wild Horses. I hope it lasts.
 

BroncoJimbo

Contributor
Long-term owner
Joined
Jun 11, 2014
Messages
291
Loc.
North GA
Just a note about my experience with Rock Auto. I emailed them regarding the incorrect listing and they responded quickly with a return shipping label and refund of all charges even though I bought this several months ago. First rate customer service.
 

BroncoJimbo

Contributor
Long-term owner
Joined
Jun 11, 2014
Messages
291
Loc.
North GA
Well, the turn signal switch I bought lasted all of 1 month or 100 miles. Is there somethng about the Grant Steering wheel hubs that eats the switch? The one on my 65 Mustang with the stock pony steering wheel is still perfect for going on 60 years.

IMG_2884.JPG
 

EPB72

Contributor
Bronco Guru
Joined
Jul 13, 2019
Messages
1,216
Loc.
Pleasant Hill, CA
Well, the turn signal switch I bought lasted all of 1 month or 100 miles. Is there somethng about the Grant Steering wheel hubs that eats the switch? The one on my 65 Mustang with the stock pony steering wheel is still perfect for going on 60 years.

View attachment 896043
If they use roll pins in the adaptor to contact the cancel cam ears then YES there is something you can do most of the time you will need to bend / tweak the roll pins in to reduce contact but enough to cancel,to much contact and you will break the ears all day long..
 

BroncoJimbo

Contributor
Long-term owner
Joined
Jun 11, 2014
Messages
291
Loc.
North GA
If they use roll pins in the adaptor to contact the cancel cam ears then YES there is something you can do most of the time you will need to bend / tweak the roll pins in to reduce contact but enough to cancel,to much contact and you will break the ears all day long..
Yeah, roll pins.
 
OP
OP
DeepC73

DeepC73

Full Member
Joined
Dec 25, 2020
Messages
224
Iave tried them from ALL of the primary Bronco parts vendors. It has to be something with my steering wheel and bumper setup; although it looks fine. I have inspected it several times. I just don’t know.
 

Me2carcrazy1

Contributor
Jr. Member
Joined
Jan 11, 2019
Messages
130
My turn signals worked but did not cancel. I bought the new plastic piece only as the wings were broken. New piece is on with provided compression split washer. Washer is loose on the flange. Turn signals won't work unless I push down on middle of plastic piece. Washer is really loose when I do that but when I let go blinkers stop working. What do I do now to make it work? Any ideas appreciated. Would bending the wires underneath to make better contact help? Also, what is the right name for the locking washer that I am calling a compression split lock washer?
 

Attachments

  • turnr2.jpg
    turnr2.jpg
    154.8 KB · Views: 173

Oldtimer

Contributor
Jr. Member with Sr. moments
Joined
Feb 4, 2005
Messages
1,802
Loc.
Sunnyvale, CA
It is called a push nut.
It is probably not pushed far enough down.
I use a 1/4" drive socket that just catches the flat on the OD of the nut.
If you push on any part of the fingers, they can't expand as they go over the center post.
Push till the plastic piece is snug, to tight and the turn signal lever will bind.
 

Me2carcrazy1

Contributor
Jr. Member
Joined
Jan 11, 2019
Messages
130
Thanks.
I pushed the push nut with a 1/4 drive socket carefully to get it on. The nut went over the flange but the push nut is loose on the base of the shaft. Fingers all look good but nut is not tight. When I apply very light pressure with mu finger to the plastic plate in the middle the signals will work. Once I lift my finger off signals won't work. Or front signal will work but not back; or signal will work but dash indicator light won't work. How can I get more pressure evenly on the plastic piece so lights will work? Or should I bend wires under switch to make better contact? Or any other ideas?
 
Top