Ultimate Raffle Bronco!!

[englewoodcowboy]

BARN? BARN? Are you kidding? It deserves better than a Barn!!

I got the perfect spot for it. It will be built in time for the drawing. Then it will have it's very own new home and it can cuddle with my 75';D



.

My BARN is awesome... It will have a nice place next to my 73 and my sons 87 B2...LOL I am a bit of a hill billy/redneck so I call it a barn but the city folk will call it a garage...LOL

A buddy of mine came to visit yeserday and will be donating a redneck Keg O Rator to my barn...;D Frosted mugs and Ice Cold brew anyone???

 

[jwtrapper]

Frosted mugs and Ice Cold brew anyone???

I could use one!! After all of this work I think I have earned one. ;D

 

[jwtrapper]

This is the 2011 Raffle Vehicle Tickets won't be available untill Feb. 2011

Our Donations So Far:

Battlement Fabrication: Rear Bumper and Tire Carrier, EFI install
T&T Customs: Y-Link Suspension System
Warn: Warn Winch
Tuffy Security: Security glove box and center console
Ruff Stuff: $250 worth of Parts
Seal Brothers: Paint Job
SSR Auto: Paint and supplies
Canon Tuck: 205 transfer case
Nemesis Industries: Cage, Custom Dash and some special touches
PRP Seats: Two of their Daily Driver bucket seats
Premier Power Welder: On Board Welder
Poison Spyder Customs: Rear Gas Tank Skid Plate
Craig Fire and Safety: First Aid Kit and Fire Extinguisher
Royal Purple: All Fluids
O'Reilly's Auto Parts: Dress up stuff for motor
Spidertrax Off-Road: 9" Rear Axle Housing
Toms Bronco Parts: Power Brake Kit and a new Starter
Bronco Hut and ididit Inc.: Chrome Tilt Steering Column
Hi-Lift Jack Company: Hi-Lift Jack
Deaver Spring: Front Coils and Rear Leafs
James Duff: Rear Quarter Guards
Painless Wiring: Complete wiring harness
Crawlertech: Crane Hi Clearance Knuckles and Assemble Front Axle
Off Road Design: Doubler Kit for 203/205
D&K Engines and Machine Shop: Machine Work/Engine Rebuild
Austin Automotive: Engine Rebuild
Randy's Ring & Pinion: Yukon Axle Shafts and Lockers
Magnaflow Exhaust Products: Muffler and tip
PSC Performance Steering Components: Power Steering Pump, Hoses and Steering Box
Bestop: Bronco Soft Top
Predator 4 Wheel Drive: Assemble Rear Axle
Tomken Machine: Front Winch Bumper
Nick's Trix: Some Bronco Goodies
Odyssey Battery: PC1500 Odyssey Battery
KC HiLiTES: 130w Black Daylighters
TrueHi9: Hi Pinion 9" Third Member
Ballistic Fabrication: Ford 9" Semi-Float Axle Flanges
Red Line Powder Coating, Inc.: Sand Blasting and some Powder Coating
Complete Off Road: Dana 44 Warn Premium Locking Hubs
Bulldog Winch: Bulldog Winch Rigging Kit
4 Wheel Parts: 37x12.5x17 Pro Comp Mud Terrain
Addicted Off Road: Rock Sliders
Power Tank: 10lb Power Tank System
West Coast Broncos: Extreme Duty Motor Mounts and Power Steering Brackets
Wild Horses Four Wheel Drive:Brake Lines and Hoses
B.C. Broncos: 5.5" Front Coil Springs
Don Allison: np203 Transfer Case and Some Great Bronco Wisdom!
Dave (ManTruck:) Windshield and Install
Ridge Runners: Hood and ECU
Four To Go 4x4: Exhaust and Recovery Strap
M.O.R.E. Mountain Off-Road Enterprises: Body Lift
Ron Davis Radiators: Aluminum Radiator
The Streetrod Manufacturing Co., Inc.: Rear Disk Brake Setup
Elite Audio Solutions: Complete High End Sound System
MSD Ignition: Distributor and Wires
Gregs 4WD Xtreme: C/B Radio and Antenna
Twizted Engineering: Front Brake Setup
4WD Factory: Front 4.56 Gears and install kit
Bushwacker: Cut Out Fender Flares
Copperhead Fabrication: 203/205 Doubler Truss Bracket
4WD 4Wheel Wheel Drive Hardware: Grant Steering Wheel
Bronco Design: Roadster Door Inserts
Stage 8 Locking Fasteners: Locking Header Bolts and X Lock locking spindle nuts
Mac's Custom Tie Downs: Custom Tie Downs to keep it safe on the trailer while traveling around
NAPA Auto: Rebuild Kit for NP205
Off Road LTD: RCI Street Belts
JB Custom Fabrication: Custom Shifter Knobs for the Triple Stick
Moab 4x4 Outpost: M4O Half Doors
RJM Injection Tech: EFI Harness
Bronco Graveyard: H4 Headlights, Harness and Bezels, Tail Lights and Bezels, Windshield Washer Setup, Wiper Arms and Wipers, Bronco Emblems.
Dakota Digitaland Brady's Garden Center: Bronco Digital Gauge
Rockstar Kustomz USA: Edelbrock Water Pump
Middick's Locksmith Shop: Lock Work
Columbine Automotive Products: Plug in Heavy Duty Jumper Cables
Daystar: Body Mounts, Bump Stops, Winch & Jack Accessories
Master Pull: Snthetic Winch Rope and Fairlead
ORO Off Road Only: LiteSPOTs Under Chassis Kit
Colorado Classic Broncos: Lokar Shift Linkage and Kickdown Cable
SoCal Broncos: 77 Bronco Fuel Doors
DIY4X.com: Custom Battery Box
Trailridge Runners 4Wheel Drive Club, Inc.: $200
Fun Treks Guidebooks: Guidebooks to Colorado Trails
Personal Touch: Media Blast and Coat the Frame
Performance Associates/SO-Cal Speed Shop: Steering Shaft
NAPA Auto/Nick Biernacki: Battery Terminals and Cables




Just updating the List. I'm still working on driveshafts, wheels and shocks...... Talked with a shop today that will get back with me later in the week about the shafts.

 

[broncoitis]

WOW! Just keeps getting better and better! This truck is gonna cause accidents in NJ on the roads when I take it out.

Lookin real nice Trapper! Keep the pics coming.

I feel your pain with the wiring. LOL! Have a centech myself and my dash is anything but stock so alot has been changed and just notice that I have a wire coming off the column plug that I must have cut and forgot to rewire it in with changes! Oops! %) Gonna post a pic later and maybe somebody on here can point me in the right direction.

 

[jwtrapper]

Wiring is finished, for the most part. Hooked it up last night and tried out a few things. Rock Lights and inside LED lights work!! Digital Gauge is cool, today I was mounting up the shift indicator for the gauge. Still have some work to do. Need to run brake lines and fuel lines. Who wants to do that? Anyone want to help? Still have lots to do before the 3rd when it goes to its first official show.

 

[addicted]

When and where for the tickets?

 

[jwtrapper]

Tickets: March 3rd, hightrails.org

 

[orangecrush4u]

Tickets: March 3rd, hightrails.org

Score Im buying a butt load;D;D;D;D;D

 

[SWBronc]

Clicked on the link, went to buy tickets, but it says you can not buy tickets any more for the 2010 raffel. So how do I get tickets for the 2011 raffel? Maybe I missed something.

 

[Fitz24]

Clicked on the link, went to buy tickets, but it says you can not buy tickets any more for the 2010 raffel. So how do I get tickets for the 2011 raffel? Maybe I missed something.

Tickes will b available March 3rd.

 

[SWBronc]

Thanks Fitz24, I thought I was becomming a cheap date.

 

[tasker]

count this guy in!!

 

[stupidboy]

Who does that High 9" and how do the pinion bearings get oiled?

 

[Mark]

Who does that High 9" and how do the pinion bearings get oiled?

http://www.truehi9.com/

 

[needabronco]

How hard is it to get that 'cage' out of that thing? :-X

 

[jwtrapper]

How hard is it to get that 'cage' out of that thing? :-X

It's not too bad if you have the right equipment. We have used a fork lift and the boom on a tow truck to get the cage in and out. That was before all of the wiring was complete though. You would have to unhook everything now and that wouldn't be much fun.

 

[jwtrapper]

http://www.truehi9.com/

The Truehi9 is awesome!! It made a huge difference in deciding on the doubler or not. It brings the pinion up at least 10". If I was in the market for some new axles I would be going with the same setup that we have in the rear. Spidertrax housing and TrueHi9. We wanted to run the same in the front but couldn't get the dana 60 knuckles donated and a second hi pinion.

 

[Mark]

The Truehi9 is awesome!! .

Yes Indeed!

 

[Fitz24]

The Truehi9 is awesome!!

That's worth at least a couple more tickets!!

 

[jwtrapper]

Thanks to the Guys at Pueblo Brake and Clutch for the Drive Shafts!!! They do a great job and we are looking forward to seeing some shafts on the Bronco.


Pueblo Brake And Clutch Inc
515 W 2nd Street
Pueblo, CO 81003-3295