Under tub seam sealer question

[bamabaja]

On off road build, recommend filling openings before Lizard Skin and Raptor ? Thanks

 

[68Broncoz]

I can take a picture of mine tonight, I did don'think I seam sealed the large holes before lizard skin or raptor.

 

[68Broncoz]

I can take a picture of mine tonight, I didn't think I seam sealed the large holes before lizard skin or raptor.

 

[72_EB]

I would not seam seal those sections. They will only hold more junk in the floor channels. It would also be very hard to make "clean" job of that.

https://www.eastwood.com/eastwood-internal-frame-coating-14oz-aerosol.html

I would recommend this for the inner frame channels, prime any bare metal, then Raptor.

You'll want to seam seal the topside bed and floor seams. The old shop manuals have the sections to cover. Snap a picture later or find online for you.

 

[68Broncoz]

Here are some pics of mine, I thought it would be tough to seal and did not want to trap anything in the channel, see pics

 

[bamabaja]

Thanks, Gents !

 

[Bronco4x4]

I used windshield urethane on the front body brace gaps. I painted oil based Rustoleum in the rear brace to match the Raptor liner color. I put Rustoleum wherever the Raptor would have difficulty getting in. I sprayed Raptor liner (with ceramic beads) on the entire tub bottom, wheel wells, and fender skirts.

 

[72_EB]

Factory seam sealer sections.