• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Upper and Rear Quarter Guards with Rampage Top

377

Sr. Member
Joined
Aug 24, 2012
Messages
372
Loc.
The Bluegrass State
Hello,
I am trying to wrap up the restoration of my 77 bronco and have a question that hopefully someone might enlighten me on. I have PNW Upper and Rear Quarter Panel Guards and would like to install a Rampage Soft Top on my rig. I was wondering do to the guards adding more "height" to the top of my bed sides if I could make some type of spacers for the tail gate soft top brackets so bedsides and tailgate would all be the same height. My second question is if I did this is there enough play in the Rampage top and frame so it would fasten securely to my windshield frame and seal correctly around my doors. Or the other option of removing material from the guards so the frame bolts directly to the bedside and tailgate. I wasn't crazy about this option because I figured it would be a great place for dirt and moisture to collect. Thanks in advance for any help you might provide me.
 

marshall godron

Contributor
Full Member
Joined
Sep 20, 2011
Messages
227
Top

I think you should sell me the rear guards and call it done;D. I'm not sure. But some one will chime in
 
Top