• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Vacuum brake booster question

Apogee

Contributor
Bronco Guru
Joined
Nov 26, 2005
Messages
6,348
Loc.
Tangent, OR
Paul,
the booster is brand new. The entire Bronco is brand new, every nut, bolt, bushing, screw, etc. I have checked and lubed all the pivots, bushings, linkages, etc. someone told me it could be the M/C not allowing the pedal to return. It's very strange.

A faulty master cylinder can do many things, however spontaneously applying the brakes is not one of them.
 
OP
OP
stupidboy

stupidboy

My wifes porn star.
Joined
Dec 29, 2009
Messages
5,790
Loc.
Morrisdale Pa.
Well, I knew it was a booster issue so I put a new one on it. Turns out that the back side of the booster rusted out around where it bolts to the firewall bracket. this in turn made it so that it could not hold the pressure equally on both sides of the diaphragm.
 
Top