• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Vent window rivet tool?

jcb9089

Sr. Member
Joined
Feb 22, 2007
Messages
510
I'm about to rebuild a set of vent windows. I'm looking for the tool used to flare the rivets.

Can someone point me in the right direction? Thanks
 

Chief Master Sergeant

Retired U.S. Air Force
Joined
Nov 6, 2002
Messages
5,222
You don't need one. Set a punch in your vice, with the blunt end up. Put the rivet in the hole and place the head side of it on top of the punch. Easier with a second set of hands, but not necessary. Take another punch and simply flatten out the rivet. It's really easy, as the rivets are soft.
 
OP
OP
jcb9089

jcb9089

Sr. Member
Joined
Feb 22, 2007
Messages
510
Thanks, what does the tool look like?

I need to put the side seal on frame too
 

BigToe

Sr. Member
Joined
Nov 24, 2012
Messages
517
If I rember correctly, I bought a kit for snaps (like you'd find on jackets or pants or whatever) and it has a nice little punch in the kit that worked great. Only a few bucks at the ACE hardware.
 

Teal68

Contributor
Bronco Guru
Joined
Mar 28, 2013
Messages
2,678
Loc.
Inlet Beach
LMC has a punch with extra rivets. It mushrooms them out real nice like the factory. U have to grind the sides a bit though to fit in the tight spots.
 
Top