• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Warn Hubs for a restoration?

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
The Warn standard locking hubs look nearly identical to the Dana-Spicers that Ford used as OE. Will the the red actuator knob from the original hub fit in the Warn standard type locking hub, that otherwise looks like the Dana? Parts for the Dana are unavailable new, and the O-rings need to be replaced to keep water out. The originals have worked well and I would like to maintain a nearly original look.
 

jim3326

Bronco Guru
Joined
Jul 12, 2010
Messages
1,781
Loc.
Appleturkey
Try a hydraulic repair shop to find just the O-ring or for that matter a driveline repair shop, maybe McMaster Carr.

Jim W.
 

Texas CB

Full Member
Joined
May 30, 2012
Messages
202
Loc.
Austin
I have been toying with the idea of trying to find a shade that matches the red on the OEM knobs and paint my faded now pink ones back to red. Figure that and some o-rings and a bit oh chrome polish and could be done for under $10
 
OP
OP
J

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
I think the compatibility of parts is the question. If the Warn hubs are the same as the Danas, an inexpensive kit with all the O-rings is available, to be installed whenever the bearings are repacked. The red actuator knob is the only visibly different part so if it fits in the Warn hub after fresh red paint, the whole hub could be kept looking and working like new. The chrome ring takes a beating when the wheel is pulled off, so new Warn metal parts make the whole assembly replaceable.
 

73azbronco

Contributor
Bronco Guru
Joined
Nov 11, 2007
Messages
8,782
I have to admit that even for a concourse level resto, using the latest hubs would not ding you much if any on value. It's a 60s Ford truck, not a Ferrari 412. That said, I did spend about $200 on restoring some 66 hubs, so call me a hypocrite I guess:)
 
OP
OP
J

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
The chrome portion can be re plated and the red knob is available new at JBG. I found a hydraulics shop that can order any O-ring. So I think I can keep the OE hubs.
 
Top