Source? Warn locking hubs - spiral snap rings.

[Tram]

So, apparently Warn does not sell this part. It’s also not included in the service kit for these hubs.

I’m looking for the small spiral snap rings that are internal to the hub, not the large internal retaining clip that holes the hub in the spindle.

They are 1.425”ID 1.610”OD.

Anyone have a source?

 

[wrenchbender]

I have used Grainger or Mcmaster-Car, as a source with good luck!

 

[Tram]

I have used Grainger or Mcmaster-Car, as a source with good luck!

I guess I'll just have to try a smaller OD. I haven't found anything with the inner and outer that match the Warn part.

 

[wrenchbender]

NAPA sells a service kit, BK 7453118, for Warn hubs I don't know if it will contain the part you need.
They also have individual parts available. I used to repair my 77 hubs.

 

[serial car restorer]

If I'm recalling the guts of a Warn hub and which part the OP is referring to, the NAPA kit does not have what he needs.

 

[snipes243]

I pulled out my spare spiral rings for 30 spline hubs. They measure ~1.370" for a brand new one and ~1.460" for a used ring. Unfortunately the bag is bit old and I can't read the part number on it .

One of these should work, but I would measure the diameter of the groove and go off that to be safe.

https://www.mcmaster.com/92602a180/
https://www.mcmaster.com/91985A185/