WH One Wire Alternator Install

[bronco t]

I installed a WH One Wire Alternator today and do not have power to the dash. I removed the old regulator and disconnected the three wire harness that ran to the alternator; as well as removed the fused link wire that runs from positive side of solenoid and connects to the three wire harness.

I suspect that I need to get 12v back to the dash, and was thinking that the two large black wires in the regulator harness need to be connected. I held off connecting these because my dad always told me that "a spark in the wire can cause a fire" LOL

Any suggestions of what wiring I need to do beyond connecting the 6g "one wire".

Thanks

 

[Viperwolf1]

Yes you need at least one of those large black wires connected through a fusible link to the battery side of the starter solenoid.

 

[bronco t]

Yes you need at least one of those large black wires connected through a fusible link to the battery side of the starter solenoid.

Thanks Viper. That was the Missing Link!