what kind of steering wheel do you have?

[TonyMontana]

looking for something under 100 and looks decent. getting rid of my stock one, it looks like crap. what you got?

will a tool be required to get the wheel off?

TIA

 

[airbur]

Adapters are normally necessary. Depending on if you have power steering you can go smaller diameter....

 

[Ethansdad73]

a little over 100 but toms has some sweet ones.

 

[half cab]

Here is an old grant gt that I hold on to....been on there about 25yrs...refurbed once and You will need a steering wheel puller...some auto parts stores will loan them out for a small deposit

 

[jckkys]

Grant classic Mustang wheel 15" diameter. stainless spokes. rubber rim, pretty much bullet proof. The Grant standard horn sucks but the billet horn with the Ford oval works and looks good.

 

[broncnaz]

I got a grant GT similar to airburs in my 73. been through 2 adapters in the last 15 years or so due to the horn contacts in the grant adapters are not that great. but I like the wheel.

 

[joshnjulie1]

kind of hard to see but the one I have I got off ebay for pretty cheap and came with the ford logo horn button. easy install too.

 

[joshnjulie1]

kind of hard to see but the one I have I got off ebay for pretty cheap and came with the ford logo horn button. easy install too.

sorry. didn't wait long enough until I closed the little window

 

[gearida]

I have the Wheel Horse steering wheel three spoke with leather and carbon fiber trim. It was before they removed the Bronco logo on the horn button. I can get any steering wheel off without a puller! I worked at a dealership and also the Jeep line, the hardest wheel is the Grand Cherokee, which I pulled the thread right out of the center cracking the wheel before the wheel broke loose. Since then I was taught, after loosing a bet for a coke how to remove the wheel without a puller.