• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Windshield hinge replacement

72_EB

Contributor
66to77
Joined
Feb 4, 2003
Messages
4,982
Anyone tackled this have any advice or input for me?
I was also wondering if anyone has gotten rid of the hinge and just put in some similar size flat stock. I don't really have a need to fold it down and was thinking this might prevent water from getting in there again.
 

michael welch

Full Member
Joined
Mar 14, 2004
Messages
165
Loc.
kent, washington
hinge removal

I did just as you said used a piece of flat stock 1/8 or 3/16ths and before welding set the top with gaskets,doors in and aligned,the bolts that go thur the dash set proper and welded both sides. Bondo outside areas and it's about 10 times stronger than stock. My other bronco leaks water at that point.
 
Top