CA Wiring Harness Install (2 Broncos)

[LLbrisco17]

City: Hawthorne

Looking for a tech who can install 2 Painless wiring harnesses on two rollers (1967 and 1968). The trucks are located in Hawthorne, CA and the dashes are already removed.

 

[ngsd]

I am doing the exact same right now with painless on a 67 and 68. pretty easy.

 

[hummerdan]

Looking for a tech who can install 2 Painless wiring harnesses on two rollers (1967 and 1968). The trucks are located in Hawthorne, CA and the dashes are already removed.

I would contact Jesse at Custom Dimensions in El Monte, CA

 

[BanditBronco]

Did you ever find anyone for this?

 

[bronco italiano]

If you have the time and some basic wiring skills you can do it yourself with the help of painless support. It is a well done harness with very nice instructions on the Painless website (in color). I am too far away from your area or I would offer.

 

[ngsd]

I agree, it is pretty easy. The hardest part is the dash. Take your time and pull it out. It I a good time to clean and repair it as well.

 

[trailerjack]

Wiring is my favorite thing to do. Anyone out there in TX want to trade wiring for mechanic work, Id do that deal in a heartbeat.

 

[Shimmy]

I am doing the exact same right now with painless on a 67 and 68. pretty easy.

this is pleasant to hear. only wiring i've done is for car stereo, subwoofer, amp, etc. i'll be tackling the painless harness in the next couple years. i feel like i need to start reading up now