ZF Trans bolted to a re-sealed 1966 Dana 20 T-shift transfer case
BC Bronco adapter kit, including new hydrolic slave cylinder with SS line and all hardware
New Luk clutch (Toms Bronco)
New Pressure Plate (Toms Bronco)
New Flywheel (Toms Bronco)
New T/O Bearing (Toms Bronco)
New Engine plater (From Ford)
New (small) starter (local shop)
Twin shifter (bought new and started hacking on it)
I was building a frame-up with new motor and this drive line. I only started the motor but never put a tub on or drove; then quit and put the motor in another EB that has a C4. This has been in my garage for a couple of years. Can e-mail any pics.
I am only interested in selling as a whole unit, no piecing out
This is everything for a conversation except a bolt on crossmember; I made my own and you are welcome to it; but it was designed brackets welded on the frame.
BC Bronco adapter kit, including new hydrolic slave cylinder with SS line and all hardware
New Luk clutch (Toms Bronco)
New Pressure Plate (Toms Bronco)
New Flywheel (Toms Bronco)
New T/O Bearing (Toms Bronco)
New Engine plater (From Ford)
New (small) starter (local shop)
Twin shifter (bought new and started hacking on it)
I was building a frame-up with new motor and this drive line. I only started the motor but never put a tub on or drove; then quit and put the motor in another EB that has a C4. This has been in my garage for a couple of years. Can e-mail any pics.
I am only interested in selling as a whole unit, no piecing out
This is everything for a conversation except a bolt on crossmember; I made my own and you are welcome to it; but it was designed brackets welded on the frame.
