Justinkurn
Newbie
- Joined
- Dec 19, 2012
- Messages
- 29
Hey Guys,
Has anyone experienced putting a NP205 Transfer case with a C6 transmission in an early bronco?
I had a front drive shaft made by Tom Woods but I am having clearance issues on the double cardan and the C6 transmission/pan.
I can't be the only one that has put this combo in so I was hoping someone had a solution. I was told to go conventional ujoint by a shop but I was not sure if my 3.5 inch lift will strain that too much. Any help is appreciated. I have pictures but I can't figure out how to upload them....
Has anyone experienced putting a NP205 Transfer case with a C6 transmission in an early bronco?
I had a front drive shaft made by Tom Woods but I am having clearance issues on the double cardan and the C6 transmission/pan.
I can't be the only one that has put this combo in so I was hoping someone had a solution. I was told to go conventional ujoint by a shop but I was not sure if my 3.5 inch lift will strain that too much. Any help is appreciated. I have pictures but I can't figure out how to upload them....