• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

38" tires too big?

Hal9000

Bronco Guru
Joined
Oct 12, 2008
Messages
1,324
Loc.
Flagstaff, AZ
Does anybody have photos of their bronco with 38" tires? Or at least have stories of what it took to fit them?

I was originally planning on just building a mild trail rig, but I've found a guy selling a set of FW axles from a '79 all done up w/ lockers and 4.10 gears AND a full set of good 38" tires/wheels. I'm very tempted to change the direction of my build at this point.
 

t.lay

Bronco Guru
Joined
Mar 17, 2005
Messages
1,261
Loc.
Grayslake, IL
5.5 lift will fit 36s with stock fenders- 38s may take a little body lift or fender trimming from there.
 

cgbexec

Bronco Guru
Joined
Sep 19, 2006
Messages
2,071
Loc.
Naples, FL
4.11s and 38s are not going to be a good combo for any serious offroading as Needabronco eluded to. 38s should be run with 4:88s or higher (numerically).

The exception would be a big block or high torque small block.
 

justinoshea

Contributor
Sr. Member
Joined
Feb 16, 2007
Messages
479
Loc.
Gilbert, AZ
To answer your question, NO. next you'll want 40s.:p Bigertireitus happens to a lot of us.

38s & 4.10 would be fine with an Atlas or a doubler....
 

bmc69

Contributor
Bronco Guru
Joined
Jun 11, 2004
Messages
12,015
I'm running 39.5s with 4.88s and a 205 t-case (only 1.96:1 low range)..and I'm woefully lacking in gearing...
 
OP
OP
H

Hal9000

Bronco Guru
Joined
Oct 12, 2008
Messages
1,324
Loc.
Flagstaff, AZ
Thanks for the input. I didn't figure the gearing would be ideal, but I was actually figuring I'd eventually drop down to 35's (gasp!). I'm not planning to build a hardcore crawler or anything, and from what I've seen putting 36"+ tires on anything that sees even moderate street use is usually just overcompensation.

Still, 410's might still be too tall for 35" tires.......
 

kkhammer

Jr. Member
Joined
Feb 20, 2007
Messages
62
Loc.
Bellingham, Wa.
My half cab had 38s on it with 3.5 suspension and 3" body lift. They fit alright for easy stuff but not for anything big. Its got 4:88s, stock 3 speed/D20 and a pretty built 351W. Low end gearing was actually pretty decent... now its got 35s on it. I would like to swap it out to 4:10s or 4:56s depending on what I decide to use for a tranny. I'll see if I have any pictures of it.
 

rockbronco66

Jr. Member
Joined
Apr 21, 2008
Messages
100
Loc.
Carlsbad, N.M.
I am running 37's with 4 inch susp. and 3 inch bl rubs a little on inner rear fender. I have a 351W and np435 with stock dana 20 and 4.10's it's needs lower gears but is very good offroad and if your steering is good you can pass an Expedition or Tahoe on the highway at 65+ (wave at their kids and smile) ps.I have a picture in my gallery.
 

jsniper06

Sr. Member
Joined
Apr 1, 2006
Messages
567
Loc.
Crowley, La.
I had 38" tires on my Bronco. I had a 5.5" lift and a 3" body lift. Never had any problems with them rubbing. I also have 4.88 gears to, not 4.10. I think I have some pics on my gallery or I will post some when I return home.
 
OP
OP
H

Hal9000

Bronco Guru
Joined
Oct 12, 2008
Messages
1,324
Loc.
Flagstaff, AZ
Dang guys.... And here I was afraid that my EB would look like a Tonka Toy with tires that big.....

I'm still not inclined to go much bigger than 35's.... I guess I could probably use them for trading stock if they're good enough.
 

hammer

Bronco Guru
Joined
Nov 13, 2006
Messages
1,359
Kinda what your after except they're 37's.

5.5" sus - 3" body - 5:13's - 205 - zf - 5.0
 

Attachments

  • Armour.jpg
    Armour.jpg
    87 KB · Views: 356

Buldozer

Bronco Virtuoso
Joined
Oct 17, 2007
Messages
3,066
Loc.
God's Country
You can check out my gallery if you want to see what it will look like with 5.5" SL and 2" BL. No problems at all with body contact w/ 38s. And 410s in my rig is perfect for street and trail with a NP435 and the lower geared T style D20. Good luck!
 
OP
OP
H

Hal9000

Bronco Guru
Joined
Oct 12, 2008
Messages
1,324
Loc.
Flagstaff, AZ
You can check out my gallery if you want to see what it will look like with 5.5" SL and 2" BL. No problems at all with body contact w/ 38s. And 410s in my rig is perfect for street and trail with a NP435 and the lower geared T style D20. Good luck!

OK, I'm going to hijack my own thread here.... Are the T style and J style D20s different gearing? Also, I'm assuming mine is a T style since It's got that t style shifter with the plastic cover that looks like an automatic floor shifter (button on the side of the handle and everything) Am I correct, or is there another way to ID them?
 

Buldozer

Bronco Virtuoso
Joined
Oct 17, 2007
Messages
3,066
Loc.
God's Country
OK, I'm going to hijack my own thread here.... Are the T style and J style D20s different gearing? Also, I'm assuming mine is a T style since It's got that t style shifter with the plastic cover that looks like an automatic floor shifter (button on the side of the handle and everything) Am I correct, or is there another way to ID them?
Yes, the T shifter type D20 is lower geared and it is what you have from your description. The shifter on a J type D20 is a single stick using a "J" shift pattern from the factory. IMO the T is a better box, but it takes a little more work to convert to twin stick if that is your desire, so a lot of folks go with the J type box for that reason.
 
OP
OP
H

Hal9000

Bronco Guru
Joined
Oct 12, 2008
Messages
1,324
Loc.
Flagstaff, AZ
At least for the time being, I don't have any plans to convert to a twin stick. When I bought my floor shifter, it came with a matching shifter and a few spare handles for the a T style transfer case. I'll just throw that in for now. At least for the type of driving I'll be doing, there probably won't be much need for twin sticks anyway.
 
Top