roundhouse
Bronco Guru
- Joined
- Sep 5, 2003
- Messages
- 2,956
Need to plate my banana shaped perches, was going to use some 1/2 in steel I have.
Any problem if the perch is wider than the spring?
The plates are about 5 inches wide, enough to drill holes and have the U-bolts pass thru also.
Should I cut them down to 2'' ?
May have to cut them down anyway, not sure I can reach in and weld them on with it sticking over the stock perch.
Any problem if the perch is wider than the spring?
The plates are about 5 inches wide, enough to drill holes and have the U-bolts pass thru also.
Should I cut them down to 2'' ?
May have to cut them down anyway, not sure I can reach in and weld them on with it sticking over the stock perch.











