• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

torquing down roller rockers

bluebronco69

Bronco Guru
Joined
Feb 15, 2005
Messages
1,856
Loc.
Damascas, OR
so we have GT 40 heads, with roller rockers, i think non adjustable, there is just a bolt down the center, and no adjustment nut, just an allen head bolt. there is no adjustment for the pushrod "cup" so these are non adjustable rockers right?

how mcuh do i torque down the allen head bolts that go through the center? i searched around google and found 20ft lbs in a few places but the info was not very clear if it was for the same kind of rockers i have
thanks
Kyle
 

67broncorebuild

Sr. Member
Joined
May 29, 2008
Messages
426
Loc.
stanwood Wa
I have roller rockers on my 289. They are non-adjustable nuts that get tightened down till the rockers stop chattering.
Is this a certan bolt that holds them down, and adjusts some other way??
And how can you torque a allen head???Is there a torque wrench that works on allen heads?(not being a smart ass, just curious)
got a pic? sounds like some spendy rockers
 
OP
OP
bluebronco69

bluebronco69

Bronco Guru
Joined
Feb 15, 2005
Messages
1,856
Loc.
Damascas, OR
i can take a pic if needed, we have a socket that goes from a 3/8 drive o the appropriate allen wrench size, and then we can use a 1/2 to 3/8 adaptor so the torque wrench will work on it

90c3fc3eb91a0984caf64c22d857308f.jpg

8ed284e6ae89c53a72c8441777745e63.jpg


thats what they look like
heres what i found about them

http://www.hawaiiracing.com/?page=s...category_id=7255cc416539a38f89e5db3cd51e351d&
they are 1.72
 

ken75ranger

Bronco Guru
Joined
Jan 27, 2002
Messages
5,069
Loc.
Troy, NY
Bolt on rockers into aluminum heads are 18-20 ft/lbs.
PM me your email address and I can send you a pdf of the ford racing instructions.
 

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,552
pedestal style rockers used on non adjustable applications. however I dont think the gt40 head uses pedistal mounts? I may be wrong.
 

Buldozer

Bronco Virtuoso
Joined
Oct 17, 2007
Messages
3,066
Loc.
God's Country
I have that style rocker on my early GT heads...may depend on the year model. I know the later models are different. I used a regular torque wrench (I think 14 ft. lbs. of torque) and a allen head socket. Regular 3/8 drive allen socket with a 3/8 to 1/2 adapter to fit my torque wrench.
 
OP
OP
bluebronco69

bluebronco69

Bronco Guru
Joined
Feb 15, 2005
Messages
1,856
Loc.
Damascas, OR
buldozer, thats the setup i have for torquing them down, the heads are 93 i think, GT 40 but im not sure

also i guess i forgot to mention the heads are cast not aluminum if that matter for the torque settings, from what i have gathered looks like the 15-20 ftlb range should be adequate.

also forgot to mention i think these are ford racing rockers if that matters.
 

Buldozer

Bronco Virtuoso
Joined
Oct 17, 2007
Messages
3,066
Loc.
God's Country
Looks like we are running about the same set up. I found these instructions that came with my Ford Racing rockers and a pic I took after installation. Looks like these call for 15 ft. Lbs. of torque. The real time consuming part of the installation I remember was shimming. Just takes some time for that. Good Luck.
 

Attachments

  • Roller Rocker Inst. 1.jpg
    Roller Rocker Inst. 1.jpg
    72.3 KB · Views: 58
  • Roller Rocker Inst. 2.jpg
    Roller Rocker Inst. 2.jpg
    100.4 KB · Views: 64
  • 005.jpg
    005.jpg
    67.8 KB · Views: 67

ken75ranger

Bronco Guru
Joined
Jan 27, 2002
Messages
5,069
Loc.
Troy, NY
pedestal style rockers used on non adjustable applications. however I dont think the gt40 head uses pedistal mounts? I may be wrong.
The gt40's are all pedestal mount stock. Iron and aluminum.

bluebronco69- you have mail
 
OP
OP
bluebronco69

bluebronco69

Bronco Guru
Joined
Feb 15, 2005
Messages
1,856
Loc.
Damascas, OR
thanks for the info everyone from what i have gathered i have the bolt on roller rockers, (easier to install) but none of them had shims when we took the engine apart, is this typical? or maybe put together poorly when we got it?
any ideas?
 

4lofun

Sr. Member
Joined
Mar 6, 2007
Messages
953
i have those roller rockers from the picture.they have a nut and an allen bolt in center.the allen is for lockdown and nut for adjusting.with each cylinder on tdc adjust so the pushrod just starts to stop rotating. hold the nut and tighten the allen bolt.tdc equals both valves closed and lifthers off cam lobes.
 

bmc69

Contributor
Bronco Guru
Joined
Jun 11, 2004
Messages
12,015
i have those roller rockers from the picture.they have a nut and an allen bolt in center..

No..they do not. Please do not confuse this issue further. The previous posts were correct..the ones in the pic are made by Scorpion or Angus and are simply bolt-down non-adjustable rollers that go where pedestal rockers were. If adjustment is required, you buy the Crane pedestal shims and/or different length pushrods. I have 4 sets of the Scorpions sitting on the shelf..and use them quite often in my engine builds.
 

ken75ranger

Bronco Guru
Joined
Jan 27, 2002
Messages
5,069
Loc.
Troy, NY
thanks for the info everyone from what i have gathered i have the bolt on roller rockers, (easier to install) but none of them had shims when we took the engine apart, is this typical? or maybe put together poorly when we got it?
any ideas?
You don't always need the shims. I only ended up using one shim. You only need them if the rockers are preloaded too much. Adding shims relieves the preload.
In the directions I sent you it explains setting them up. It also has the part number for the shims if you do need them.
 
Top