• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Anyone with TSL 34/9:50 on a LUBR?

ADNICK

Jr. Member
Joined
Jul 2, 2009
Messages
107
If so what's you lift, wheel size ect.....any issues?


Thanks,
Nick
 

sellitall

Bronco Guru
Joined
Jul 30, 2002
Messages
1,444
Loc.
Malvern, Pennsylva
There's been plenty of posts regarding this. I suggest you search the topic. I had 33x9.5's on stock steelies with a 3.5" WH lift. It fit good, but I wouldn't recommend hitting any radical trails with this setup. The 34x9.5 is fine width wise with stock rims. You run into problems with the height. Interco tires are also either right on the mark in terms of measurements or even bigger. You may have some rubbing at the lip of the 1/4. Hope this helps some.
 

AWS

Sr. Member
Joined
Aug 2, 2004
Messages
596
Loc.
ST LOUIS
Jim Lemanek bought this from my son Matt, and wheeled it at the Fawl Crawl. It has 3.5 Duff with 34x9.50 super swampers and no body lift. When he would get twisted up on the trail the tire would make contact with the quarter panel. It was kinda funny because he was behind us and you would hear that baseball card in the bike spoke sound.
 

Attachments

  • matts69bronco 001.jpg
    matts69bronco 001.jpg
    225.9 KB · Views: 60
  • matts69bronco 011.jpg
    matts69bronco 011.jpg
    132.7 KB · Views: 89
  • PICT0011.jpg
    PICT0011.jpg
    246.2 KB · Views: 63
OP
OP
A

ADNICK

Jr. Member
Joined
Jul 2, 2009
Messages
107
Helps a lot

I have read some of the old posts...those along with what was said here helps me make a decision.

I had narrowed my options down to:

TSL 32/9:50

BFG All Terrain TA 33/9:50

TSL 34/9:50



Thanks,
Nick
 

Mongonius

Sr. Member
Joined
Jan 30, 2009
Messages
386
Loc.
Cajun in Texas
"Tell uncle if he gets a translator... be sure it speaks Bocce" ;D

I'm too much of a newb to understand the depths of the Bronco Langauge.
 

1sicbronconut

Contributor
Bronco Guru
Joined
Dec 26, 2006
Messages
2,469
I have read some of the old posts...those along with what was said here helps me make a decision.

I had narrowed my options down to:

TSL 32/9:50

BFG All Terrain TA 33/9:50

TSL 34/9:50



Thanks,
Nick

How about the BFG mud in a 33" x 10.5" thats what a lot of us LUBER folks run. I tried the swamper's but the big lugs on the side hit the quarter panels during flex so I went to the BFG's and have been very happy with them.
 
OP
OP
A

ADNICK

Jr. Member
Joined
Jul 2, 2009
Messages
107
Good point about the BFG Muds, just thought that they were too wide....



Nick
 

Mac2Night

Bronco Guru
Joined
Aug 10, 2005
Messages
2,204
Okay, I'll bite. My '73 with 3.5 suspension lift and 33x9.5 BFG A/Ts
 

Attachments

  • IMG_4238.jpg
    IMG_4238.jpg
    149.7 KB · Views: 64

1sicbronconut

Contributor
Bronco Guru
Joined
Dec 26, 2006
Messages
2,469
Here's a few of my uber trail LUBER ;D
 

Attachments

  • 063.jpg
    063.jpg
    115.4 KB · Views: 31
  • 027.jpg
    027.jpg
    120.9 KB · Views: 28
  • rmr 10.jpg
    rmr 10.jpg
    57.5 KB · Views: 38
  • rmr 11.jpg
    rmr 11.jpg
    65 KB · Views: 36

Amac70

ME
Joined
Mar 27, 2002
Messages
3,269
heres one i saw on craigslist today, says 5.5 suspension and 2 bl. 33x12.5x15 tires.
3n13m53pb5T15Q15S59b3aab1839a17ab1833.jpg
 
Top