• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

1995 5.8L/351 conversion..good option?

Zeke

Full Member
Joined
Feb 15, 2002
Messages
191
Hey Guys,

My '75 302 is getting tired and I have found a complete 1995 5.8L/351 with approx.70,000 miles.

This would mean coverting to F.I. and computer controlled.

Is this a good option, or is it going to be too involved?

What I can see...

New Radiator
New Hood to clear F.I.
Will C4 handle the 351?
Wiring harness to 351
Computer
Oil pan

What else am I overlooking?

I already have replacement gas tanks with return ports.

Thanks,
Zeke
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,114
Good motor. Very desirable with the roller cam
Intake is too tall, even with a new hood. 3+" body lift and the right hood and it might work. There are other intake options.
Fuel injection is good, but that motor is just a 351, a carb and intake swap (along with the right distributor) is also an option. That will also eliminate any wiring issues.
The C4 should be fine, if not a proper rebuild will be all it needs.
The oil pan will need to be a rear sump. Truck pans generally work if you clearance a corner for the front diff (or many people just let the diff clearance the pan itself)
Radiator is often just fine. It is not needed for a 351 swap but you do need a good one in there.
 
OP
OP
Z

Zeke

Full Member
Joined
Feb 15, 2002
Messages
191
It's the 351 with the tall throttle body and two intake tubes stacked vertically.

Still have doubts about my converting the F.I. skills !

Thanks,
Zeke
 

ep67bro

Contributor
Bronco Junky
Joined
Aug 28, 2008
Messages
3,873
Loc.
Easton, MD
if you are nervous about the fuel injection switch to a new intake, carb and distributor. You could always add the fuel injection down the road.
 

Dusty

Bronco Guru
Joined
Jun 28, 2001
Messages
2,969
That's a great motor, I have two of them. Its a bit more of a chore to keep EFI on it and fit it under the hood, but worth the effort in my opinion.

Dusty
 
Top