msweb
Bronco Guru
- Joined
- Aug 29, 2003
- Messages
- 2,377
Some good ideas I hadn't thought of, thanks guys!
One thing though - The backing plates float because thats how you are able to line up the doors properly, right?
Tacking the plate in place would be a cinch if I could do it fast enough to not catch the Rhino on fire. I can't get a nut onto any of the bolts, they're all broken off flush or inside the threads. Heating them up and penetrating oil would be my only option before drilling them. I'm going to try all ideas before cutting the inner fender or kick panel though, Thanks!
One thing though - The backing plates float because thats how you are able to line up the doors properly, right?
Tacking the plate in place would be a cinch if I could do it fast enough to not catch the Rhino on fire. I can't get a nut onto any of the bolts, they're all broken off flush or inside the threads. Heating them up and penetrating oil would be my only option before drilling them. I'm going to try all ideas before cutting the inner fender or kick panel though, Thanks!











