• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

I could kill Petronix engineer if I find him

Seymourpus

BANNED
Joined
Dec 11, 2009
Messages
166
Loc.
So Cal
So, my PO replaced the points with a Petronix Ignitor onto an Autolite dual vacuum diaphragm distributor.

I left the ignition switch in the "0n" position the other day and next day, no start like I was out of gas.

Apparently, some GENIUS at Petronix decided to sell something that if you leave your car in the on position over 10 minutes without the engine running, you fry the Petronix Ignitor and walk home.

I could beat that idiot to death right now. A new Ignitor is $100. A new billet polished hi-performance distributor with electronic ignition, new cap and rotor is $200.

I got the new distributor and as I was going to install it, the rod to the oil pump fell down to the bottom of the oil pan.

I would file a suit for such a ridiculous invention where if you leave your car key in the on position you ruin your ignition.

I will call them tomorrow and get even.

Meanwhile, I removed pan, and got rod.

To jam up Petronix ass.
 

phred

Contributor
Bronco Guru
Joined
Aug 25, 2006
Messages
3,608
Loc.
Earth
Most all non-electronic ignitions will fry if you leave them in the on positions.
 

taipeichris

Bronco Guru
Joined
May 11, 2006
Messages
1,753
Call them, it might be something they can replace. I think they are in San Dimas.

Good luck.
 

73stallion

Bronco Guru
Joined
Mar 5, 2004
Messages
16,786
Loc.
Eugene, OR
duraspark will burn up even faster than that. be nice to them and they may even help you. i had one of their distributor roll pins shear, took it to them next day and they gave me a whole new distributor for free no questions asked.
 

chuck

Bronco Guru
Joined
Aug 14, 2001
Messages
6,474
Loc.
Ingram, Texas
So, my PO replaced the points with a Petronix Ignitor onto an Autolite dual vacuum diaphragm distributor.

I left the ignition switch in the "0n" position the other day and next day, no start like I was out of gas.

Apparently, some GENIUS at Petronix decided to sell something that if you leave your car in the on position over 10 minutes without the engine running, you fry the Petronix Igniter and walk home.

I could beat that idiot to death right now. A new Igniter is $100. A new billet polished hi-performance distributor with electronic ignition, new cap and rotor is $200.

I got the new distributor and as I was going to install it, the rod to the oil pump fell down to the bottom of the oil pan.

I would file a suit for such a ridiculous invention where if you leave your car key in the on position you ruin your ignition.

I will call them tomorrow and get even.

Meanwhile, I removed pan, and got rod.

To jam up Petronix ass.

First, if you leave the key on with points and they happen to be closed the coil will burn up. Same with the Petronix, if the magnet is close to the pickup it will burn up. The instructions warn of this problem. If the PO had put out a few extra bucks and bought the ignitor II you wouldn't have had this problem. Also the instructions say to keep the points and condenser in the glove box. With a petronix you will never have to set the dwell or timing or replace the points and cond.....unless you leave the key on. BTW the oil rod coming out has nothing to do with the petronix. Either the keeper was left off or broke.
P/S when I did the same thing at broncodaz 30 I called them and told them what I had done and they were nice enough to give me a new one.
 

Rox Crusher

Bronco Guru
Joined
Dec 13, 2008
Messages
2,830
LOL

Maybe he should just sell his bronco and buy a corolla or pt cruiser or something

as long as it has an fully functioning hood latch and a 5 gallon paint bucket in place of the seat, he should be ok
 

Devin

Bronco Kineticist
Joined
Apr 29, 2004
Messages
3,956
I thought you were the smartest person on the planet, seemorewuss? You didn't know about this? I am surprised that you didn't just fab up a new ignition out of the chain on the super-model girlfriend in your passenger seat and some bubble gum.
 

shonivey

Sr. Member
Joined
Oct 1, 2008
Messages
629
My battery dies if i leave the headlights on. Not sure if it is a problem i should address to Optima or if i should raise hell with Sylvania.
 

ken75ranger

Bronco Guru
Joined
Jan 27, 2002
Messages
5,069
Loc.
Troy, NY
Once you fix the Pertronix you might want to take a look at your resistor wire under the dash. They tend to over heat when the key is left on overnight.
 

got-broncos

Bronco Guru
Joined
Feb 10, 2007
Messages
1,269
I would go after Ford for not thinking about a Idiot buzzer for the keys 40 years ago. Yep, go after them for not having automatic headlights too. They should have known people are to lazy to do the right thing.
 

bmc69

Contributor
Bronco Guru
Joined
Jun 11, 2004
Messages
12,015
My battery dies if i leave the headlights on. Not sure if it is a problem i should address to Optima or if i should raise hell with Sylvania.

Sue Kennecott. It's the copper that is at the root of your problem. No copper and those other items would never have caused you the slightest trouble.:p
 

blubuckaroo

Grease Monkey
Joined
Jun 11, 2007
Messages
11,796
Loc.
Ridgefield WA
Use the accessory position on the ignition switch if you are going to sit and listen to tunes. I've replaces the coil on the factory Duraspark twice before the boys learned about that.
 
Top