motoman
Bronco Guru
Hey guys,
Broke my D20 output shaft during Christmas vacation....so I've been saving for the Wild Horses hardened output shaft assy with speedo conversion..... the install went very well!!!!
Well with one exception... when I pulled the fill plug to check the oil level a mix of 80w and trans fluid came shooting out.....
I am trying to wrap my head around this and get it taken care of tomorrow. I have the C4 with the T D20... do I pull the Tcase and adapter to get to the correct seal (the one at the tail end of the tranny?)
http://shop.oreillyauto.com/ProductDetail.aspx?MfrCode=SKF&MfrPartNumber=14978&PartType=768&PTSet=A ??????
I read in other post to get a buddy to help so it doesn't land on my chest when I take it out. Do you have to completely remove the cross member to get it out????
TIA!
Broke my D20 output shaft during Christmas vacation....so I've been saving for the Wild Horses hardened output shaft assy with speedo conversion..... the install went very well!!!!
Well with one exception... when I pulled the fill plug to check the oil level a mix of 80w and trans fluid came shooting out.....
I am trying to wrap my head around this and get it taken care of tomorrow. I have the C4 with the T D20... do I pull the Tcase and adapter to get to the correct seal (the one at the tail end of the tranny?)
http://shop.oreillyauto.com/ProductDetail.aspx?MfrCode=SKF&MfrPartNumber=14978&PartType=768&PTSet=A ??????
I read in other post to get a buddy to help so it doesn't land on my chest when I take it out. Do you have to completely remove the cross member to get it out????
TIA!











