• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

LOWERING my Bronco

OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Talked to my window guy today. He is an old high school buddy. Hopefully we will have the windows done here in a week or two. He is pretty excited about seeing the Bronco, and thinks that it shouldn't be more than $40 per window (which fits right in my budget)! I will be sure to post some pics when we roll her out into the sun. With high school soccer just getting started, I will have limited time to get things done. I am hoping to have her going for next summer. :cool:
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Well the window frames are done. My body guy is finishing the halfcab this week. Finally snapped a few pics of it back home out in the yard. Looks alot different, but it will all come together when I sit this bad boy on the lowered frame. This is just the first phase, as I have custon valance work planned for the near future. As always...time and money!
 

Attachments

  • 100_6645.jpg
    100_6645.jpg
    134.1 KB · Views: 154
  • 100_6646.jpg
    100_6646.jpg
    139 KB · Views: 172
  • 100_6648.jpg
    100_6648.jpg
    130.5 KB · Views: 150
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Oh and Bill...would you like me to gift wrap this bench seat for you? Haha! :D
 

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
Nice looking pics, I was wondering with the additional rake of the windshield what did the final angle end up being. Looks close to the angle of the mustang so that the stock mustang vent windows may work as another stock looking option.

Gift wrap not necessary, just nicely packaged and get it on the bus;D.
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
I'll be interested to see what you plan on for a windshield gasket.

I will either use a brand new stock gasket and trim it in, or they have another press in type for a more modern look also. I will post next week when my window guy takes a look.
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
nice yellow lab in the 3rd pic!

Believe it or not, that cat LOVES Broncos. If I ever leave the window down he is in that truck in a heartbeat. I just pulled the truck into the yard after being in the body shop for a few months, and he was already getting ready to jump in! :D
 

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
Heres the latest pic and not much will change from this point on as there are no funds for anything else. Soft top I am still not sold on the look, so it may not stay. A toneau cover is also something it needs as well as a stereo. I like listening to the exhaust, but the wife would like to have a radio.
 

Attachments

  • DSCN0757 (Medium).JPG
    DSCN0757 (Medium).JPG
    33.8 KB · Views: 187

Tito

CB Fire Starter
Joined
Jan 29, 2006
Messages
10,781
Loc.
Bakersfield, CA
Yeah top is too high, I'd angle it down in the rear and knock about 10" off of it. Probably test with some prop rods first.
 

73stallion

Bronco Guru
Joined
Mar 5, 2004
Messages
16,786
Loc.
Eugene, OR
think i'd just do a single hoop behind the seats, like a roll bar without the kickers or with real low kickers and a bikini top.
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Hmmmm. I wonder how difficult it would be to chop that soft top 3 inches?:cool:
 

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
That would be extremly difficult after all the things that have been done already. ;D There are two choices, the first one is a no cut option and just requires moving the bows and laying them down more. The second is just cut the ends of the bows off.

The other issue with this top is that it bellows and pulls the windshield around. It does not do this on my other truck so I wonder about the air flow with no widows and nothing in the back bed.
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
I have been working on the front and rear valance/roll pan mod ideas. I already have the front worked out on paper, but I have to pick up the part I will be modifying for the rear roll pan/bumper. Winter will be here soon enough, and mama would love to be able to get her van in the garage! I have to appreciate her patience!:-X
 

gojrracing

New Member
Joined
Oct 26, 2010
Messages
3
What would be the easiest way to LOWER a early Bronco, and retain or improve the handling? I have a '68 half cab I would like to try it on. I would like to take it as low as I can and still have room for the Dana 44 under the front end. Any ideas if it will clear the cherry bomb exhaust

I think you should go to the expert in a Bronco like yours. That's a good idea that I can say. :D
 
Last edited:

CosmicArkie

New Member
Joined
Oct 27, 2010
Messages
20
Well, late to the thread but way early on the idea. About 20 years ago I did the "C" frame in the rear method with a Granada 8 inch rearend and used an 88 Ranger 2wd twin I beam front end under my '72. At the same time i stuck an 85 3.8 V6 T-Bird engine and AOD out of an 88 Mustang in, then turboed and Holley ProJectioned it. Kinda my answer to the GMC Typhoon or Syclone or whatever it was they were doing in the late '80's. Did a few body mods like the old reverse the front fenders for rear flares; front and rear bumper delete and rollpans instead. Dropped the rear plate to the center of the pan with a hidden hitch behind it. Used late '80's C-30 dually rear fender clearance lights for side markers. Stuff like that. I'd upload a couple pics but I just found this forum when researching vent window deletes. Anybody got any info/ideas on that?

Thanks,

Jim
 
Top