• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

quick release Bronco top (hard top)

backpain

Bronco Guru
Joined
Oct 2, 2007
Messages
1,094
So, before I take on one more "experiment" I guess I should ask. Has anyone engineered something better than 25x bolts to hold their top down?

Yes, I actually like to take the hard top on and off. Weather here is unpredictable. Hot and dry, hot and wet, cold and dry, cold and wet, etc off-and-on all year long.

Here's what I've done:
1. reinforced underside of bed rails with 1/2" flat bar
2. reinforced and gusseted mounting rails on the top

Here's the plan:
- use fewer than the factory number of bedrail mounts and make them easier to get on and off (i.e. stop chasing 1/2" nuts around)
- drill and tap/captive nut if necessary approx 3x holes for each bed rail and use knobs w.studs (similar to the dash/windshield knobs - but will probably use a set of 6 made for a Jeep hard top, because they aren't $50/pair)
- something for the windshield mount

Here's the question:
Anyone have experience with heavy duty over-center or under-center draw latches?

I'll probably use something like http://www.southco.com/browse/over-center-draw-latches-7333.html

Goal would be one latch on each side/edge of windshield frame (connected to reinforced top edge) to draw the top closed and hold it (like most convertibles) and probably a few quick screws/captive nuts or similar to span the middle.

I won't get into all the reinforcement I've done, various latch designs considered, etc (needless to say - this is not a recent idea, it's been quite awhile in the making), but my real question is about draw latches or other quick latch ideas. Most of you are more creative than I.

Who's done what? Even, non-EB industrial applications . . .

Here's a thought provoker (link) and a few pics of latches:
http://www.quadratec.com/products/13022_00.htm

(don't worry, I'm not going to be riveting any sheet metal receivers and betting my hard top on those)
 

Attachments

  • 91_under.ldt.jpg
    91_under.ldt.jpg
    10.8 KB · Views: 164
  • v7.ldt.jpg
    v7.ldt.jpg
    11.9 KB · Views: 158
Last edited:
OP
OP
B

backpain

Bronco Guru
Joined
Oct 2, 2007
Messages
1,094
You should look into soft tops.

Yeah, I know :cry:. Will probably end up with both. But for kicks will still simplify the hard top even it it only goes on for winter. Overkill is my name, except when it's Gave-up.
 

bronko69er

EB Addict
Joined
Oct 16, 2006
Messages
4,599
Loc.
Renton, WA
I've toyed with the idea in the past, but never got past looking at latches. I'm gonna watch this thread.
 

WyleCoyote

Bronco Guru
Joined
May 2, 2002
Messages
1,739
I've seen canopy clamps used for the back, 2 per side. That seemed to work well enough. The windshield interface is going to be the tough spot.
 

Heus33

Bronco Guru
Joined
Jun 1, 2005
Messages
7,488
PO put in plate floors in my EB and finished off the insides of the tub (and I'm assuming the bedrails too. Then he drilled and tapped holes in the old stock locations. So I just bolt the top down (no nuts required - ha). Its worked really well.
 

Hank_

Bronco Guru
Joined
May 9, 2010
Messages
1,915
On my jeep I still ended up using bolts. It did have the latches up front just like in the picture you have posted. The latches work great as long and the bolts in the back are doing there job. I also like a hard top from late fall to late spring and soft or no top the rest of the time.

Henry
 

bmc69

Contributor
Bronco Guru
Joined
Jun 11, 2004
Messages
12,015
I saw a couple back in the day that were 'quick-er' release by installing 1/4-turn Dzus fasteners in the bed to replace all those bolts and using only about half of the bolts along the top of the windshield frame.

Meh..I've never done one of mine that way because I was not super impressed by how much time was saved.
 

450rbronco

Sr. Member
Joined
Aug 5, 2008
Messages
389
wow guys i use 4 truck cap clamps on sides and im done but unfortunatly i still use like 4 or 5 bolts for the windshield frame still easier than 5 hundred bolts
works great
 

Steve83

Bronco Guru
Joined
Jul 16, 2003
Messages
9,360
Loc.
Memphis, TN, USA, Earth, Milky Way
Here's the plan:
- use fewer than the factory number of bedrail mounts and make them easier to get on and off (i.e. stop chasing 1/2" nuts around)
- drill and tap/captive nut if necessary approx 3x holes for each bed rail and use knobs w.studs
That's a really dangerous idea, for a few reasons.

No matter how strong the bedrail is, you still have to worry about the fasteners themselves (both in tension & in shear). If you use fewer fasteners, they need to be near the corners - NOT evenly spaced along the sides. The middles don't get nearly as much load as the corners, so if you space fewer fasteners evenly, there won't be enough strength in the corners, and they'll all fail sequentially (like a zipper). If it happens in a rollover and you don't have a GOOD cage, YOU & your passengers could get sheared, too. :eek: So not only would fewer fasteners need a weird spacing, they'd have to be bigger & stronger.

Using knobs is also a bad idea unless they're solid machined steel. A stud with a plastic knob doesn't have the clamping force because the plastic will crack under an impact, fall off, and again: you're getting sheared.
Then he drilled and tapped holes in the old stock locations. So I just bolt the top down (no nuts required - ha).
That's the only safe way to speed it up. Use just as many of the same (or higher) strength fasteners, but make them easier/quicker to work with.
wow guys i use 4 truck cap clamps...
Those have almost no shear strength, which means the top can slide out of them under impact/rollover. It's fine for a pickup bed (no occupants), but not for a wagon-body vehicle with seating under the camper.
 

daninghram

Jr. Member
Joined
Feb 10, 2010
Messages
66
One thing I really like is how bright the inside of my Bronco is with the white top and windows. I fear a softtop would make it darker? And pulling the hardtop would be a pain and looks like 2 or 3 guys. It would be great to have a way to get the top off but keep it safe till you do. I guess i need a roll bar too
 
OP
OP
B

backpain

Bronco Guru
Joined
Oct 2, 2007
Messages
1,094
That's a really dangerous idea, for a few reasons.

Agree on most points. Any reduction of volume should be evaluated. Definitely agree that a knob if used, unless permanently attached (ie.. one-piece with stud or equivalent) shouldn't be the clamping surface (i.e. it's only for spinning the stud/bolt). Also, forgot to mention alignment pins at least at the corners, which, although providing zero clamping force, can be adequately sized to enhance protection against shear forces.

Keep it coming, even the bad stuff, just thinking through possible ideas. . . .
 

Steve83

Bronco Guru
Joined
Jul 16, 2003
Messages
9,360
Loc.
Memphis, TN, USA, Earth, Milky Way
Yes, blind alignment pins (non-clamping) are good for shear loads, and if done right, you could get away with a few clamps & a bunch of pins. But getting them all aligned with no binding WHILE keeping them tight enough to sustain shear loads will be difficult.

'78-91 FSBs use 2 removeable alignment pins in the bedrails, ONLY to aid with installation. '92-96 FSBs use 4 alignment pins: 2 at the front for installation alignment, and 2 at the rear to help tie the integral roll bar into the bedrails. To see them, click my signature & look thru the Camper Shell album.
 

450rbronco

Sr. Member
Joined
Aug 5, 2008
Messages
389
as for truck clamps giving way maybe so but if you really think these old flimsy tops are gonna rotect anyone in a roll over i say think again thats why i have a roll cage ...
 

ol gray mare

Sr. Member
Joined
Jul 3, 2009
Messages
475
You might research how the old 55-57 Tbird tops we attached. I had a 55 when I was in high school, and remember there were two cam over type latches on the winshield and two at the rear window. The ones at the rear window twisted into holes in the rear deck and kept downward pressure on the seals. I'm thinking two on each bed rail would keep the top snug. I considered doing spomething similar when I had a hard top, but just went with the soft top.
 
OP
OP
B

backpain

Bronco Guru
Joined
Oct 2, 2007
Messages
1,094
Ok, so here's some of the things I forgot or failed to mention in the original post (... and I'm sure there is more, that I will slowly remember or you will remind me)):
1. roll cage is a given (although I am not currently planning to tie in the top directly to the cage)
2. alignment pins at windshield and bed rail mounts (heavy duty stuff to make alignment easier and prevent lateral movement; haven't determined how many yet)
3. factory bed stakes will still be used (I need them to hold the 2x4 that lifts the rear of the top and hangs it in the garage). These of course help with lateral and vertical movement.
 
Last edited:
OP
OP
B

backpain

Bronco Guru
Joined
Oct 2, 2007
Messages
1,094
. . . .
'78-91 FSBs use 2 removeable alignment pins in the bedrails, ONLY to aid with installation. '92-96 FSBs use 4 alignment pins: 2 at the front for installation alignment, and 2 at the rear to help tie the integral roll bar into the bedrails. To see them, click my signature & look thru the Camper Shell album.

good stuff. thx.
 
OP
OP
B

backpain

Bronco Guru
Joined
Oct 2, 2007
Messages
1,094
as for truck clamps giving way maybe so but if you really think these old flimsy tops are gonna rotect anyone in a roll over i say think again thats why i have a roll cage ...

I agree the top is not going to protect much in rollover - that's what your cage is for. This is largely about holding it in place. You don't want it to be a projectile or guillotine, etc . . . .
 
Last edited:
Top