So, before I take on one more "experiment" I guess I should ask. Has anyone engineered something better than 25x bolts to hold their top down?
Yes, I actually like to take the hard top on and off. Weather here is unpredictable. Hot and dry, hot and wet, cold and dry, cold and wet, etc off-and-on all year long.
Here's what I've done:
1. reinforced underside of bed rails with 1/2" flat bar
2. reinforced and gusseted mounting rails on the top
Here's the plan:
- use fewer than the factory number of bedrail mounts and make them easier to get on and off (i.e. stop chasing 1/2" nuts around)
- drill and tap/captive nut if necessary approx 3x holes for each bed rail and use knobs w.studs (similar to the dash/windshield knobs - but will probably use a set of 6 made for a Jeep hard top, because they aren't $50/pair)
- something for the windshield mount
Here's the question:
Anyone have experience with heavy duty over-center or under-center draw latches?
I'll probably use something like http://www.southco.com/browse/over-center-draw-latches-7333.html
Goal would be one latch on each side/edge of windshield frame (connected to reinforced top edge) to draw the top closed and hold it (like most convertibles) and probably a few quick screws/captive nuts or similar to span the middle.
I won't get into all the reinforcement I've done, various latch designs considered, etc (needless to say - this is not a recent idea, it's been quite awhile in the making), but my real question is about draw latches or other quick latch ideas. Most of you are more creative than I.
Who's done what? Even, non-EB industrial applications . . .
Here's a thought provoker (link) and a few pics of latches:
http://www.quadratec.com/products/13022_00.htm
(don't worry, I'm not going to be riveting any sheet metal receivers and betting my hard top on those)
Yes, I actually like to take the hard top on and off. Weather here is unpredictable. Hot and dry, hot and wet, cold and dry, cold and wet, etc off-and-on all year long.
Here's what I've done:
1. reinforced underside of bed rails with 1/2" flat bar
2. reinforced and gusseted mounting rails on the top
Here's the plan:
- use fewer than the factory number of bedrail mounts and make them easier to get on and off (i.e. stop chasing 1/2" nuts around)
- drill and tap/captive nut if necessary approx 3x holes for each bed rail and use knobs w.studs (similar to the dash/windshield knobs - but will probably use a set of 6 made for a Jeep hard top, because they aren't $50/pair)
- something for the windshield mount
Here's the question:
Anyone have experience with heavy duty over-center or under-center draw latches?
I'll probably use something like http://www.southco.com/browse/over-center-draw-latches-7333.html
Goal would be one latch on each side/edge of windshield frame (connected to reinforced top edge) to draw the top closed and hold it (like most convertibles) and probably a few quick screws/captive nuts or similar to span the middle.
I won't get into all the reinforcement I've done, various latch designs considered, etc (needless to say - this is not a recent idea, it's been quite awhile in the making), but my real question is about draw latches or other quick latch ideas. Most of you are more creative than I.
Who's done what? Even, non-EB industrial applications . . .
Here's a thought provoker (link) and a few pics of latches:
http://www.quadratec.com/products/13022_00.htm
(don't worry, I'm not going to be riveting any sheet metal receivers and betting my hard top on those)
Attachments
Last edited:











