• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

351 Lightning engine

70EB

Bronco Guru
Joined
Aug 31, 2003
Messages
1,621
Loc.
Gig Harbor
Deployed now so I can't access all my pics so I have to refer to my ealrier threads.

I used the 351W GT-40 lower with a Cobra upper. Fit under a Proflow hood and I also had a 1" BL which was probably not necessary but helped with my ZF install.

A measurement is in the thread below (post #15):

http://classicbroncos.com/forums/showthread.php?t=89700
 

Attachments

  • Engine1.jpg
    Engine1.jpg
    136.6 KB · Views: 127

COBlu77

Sr. Member
Joined
Feb 10, 2004
Messages
867
Loc.
Arvada, CO
you have to remove the upper radiator hose to change the belt?

Yes, I suppose I would, but serpentine belts are supposed to be good to 60k or more. I've got about 20k on it since I did my conversion without an issue there. When I've had to remove the belt to work on something, I have just removed the hose at the radiator and lose very little fluid.

The radiator hose routing is one of my least favorite things about my conversion, but it has worked well for the last 3 years and doesn't overheat or give me any issues. The upper and lower hoses are Summit's stainless steel flex hoses with the ends from stock rubber hoses. Someday, I might have the inlet and outlet swapped on the radiator, but "it ain't broke, so I'm not fixing it". It was a compromise to allow me to have OBA (compressor), a saginaw PS pump, and have everything run off of one serpentine belt using stock brackets.

I won't be near my EB until the weekend to measure the block to the top of the plenum. Like I said before, with a 2" BL, I have maybe 3/8" from the highest point on the throttle body to the hood.
 

wpaeb

Sr. Member
Joined
Mar 19, 2005
Messages
429
Loc.
Clarion ,PA
If your computer controls the transmission the easiest way to EFI is with a '93 mustang harness and ECU. Should plug in to your existing parts.
 

Ranchtruck

Sr. Member
Joined
Feb 7, 2008
Messages
768
Or use the MAF obd1 4r70w out of a 95 f150.

Does a 351w with the truck lower, BC adapter, and mustang upper actually fit under a stock hood with no body lift? Seems like it would be close to the same height as the gt40 stuff.
 
Top