• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

C4 Cooling Problem

Steve

Bronco Guru
Joined
May 5, 2003
Messages
2,986
Loc.
Grand Junction, CO
I have a stock C4 in the EB, with an external cooler with auto temp switch and fan for cooling. The cooler is mounted under the driver's seat. I've had this setup for years and it's always cooled well.

Since the recent rebuild I've done two runs to test everything out before I paint it. The trans is working and shifting fine, but won't cool. The first run the fan never kicked on and the team got up to 240* at one point. :eek: When I got home I drained and refilled the trans since the fluid smelled slightly burnt.

The next run the cooler fan wasn't cycling, so I stopped and jumper wired across the temp switch so the fan would run all the time. It didn't seem to help as the trans still got up close to 230* with the fan running. The cooler didn't feel nearly that hot to the touch when the temp got that high, like the pump isn't pumping enough fluid through the cooler lines.

Question: If the pump isn't working well, or at all, will the trans still work and shift properly? I've checked for kinked lines/hoses to the cooler and they're fine.

Any thoughts or advice? Do I need to drop the trans and rebuild it?

TIA
 

pcf_mark

Bronco Guru
Joined
Jun 11, 2010
Messages
3,697
Are you only running the external cooler or is it in line with the factory cooler?

I want to follow this thread as I am going to test my used C4 out this weekend and the last item I have to install is the cooler.
 
OP
OP
Steve

Steve

Bronco Guru
Joined
May 5, 2003
Messages
2,986
Loc.
Grand Junction, CO
Are you only running the external cooler or is it in line with the factory cooler?

Only the external cooler, so there's no heat being added by a "cooler" inside the radiator. That's how I've run it for several years with no problems ever keeping it cool until now.
 

A&Mbronco

Sr. Member
Joined
Nov 18, 2004
Messages
547
Loc.
Houston,TX
I've had a problem real similar to this right after a rebuild. Check to make sure fluid is actually circulating through the transmission lines to the aux cooler. There is a check ball/spring in the stator that was stuck and not allowing fluid to go through the lines.
 
OP
OP
Steve

Steve

Bronco Guru
Joined
May 5, 2003
Messages
2,986
Loc.
Grand Junction, CO
I've had a problem real similar to this right after a rebuild. Check to make sure fluid is actually circulating through the transmission lines to the aux cooler. There is a check ball/spring in the stator that was stuck and not allowing fluid to go through the lines.

Where, exactly, is this check ball/spring? The only thing I did to the trans over the last two years while I built the rig was to drop the pan and install a new filter. I didn't touch anything else or remove the trans from the engine.

Thanks!
 
OP
OP
Steve

Steve

Bronco Guru
Joined
May 5, 2003
Messages
2,986
Loc.
Grand Junction, CO
Is there any way to check that without dropping the trans and pulling it apart? Doesn't look like it from the pics...

I'm going to disconnect the cooler-to-trans line at the cooler this evening, put a short piece of hose on it directed to a container, start it and see how well it's pumping fluid through the cooler. Will post up what I find out from that.
 

A&Mbronco

Sr. Member
Joined
Nov 18, 2004
Messages
547
Loc.
Houston,TX
On mine it wasn't pumping fluid at all through the cooling lines, was easy to tell b/c it they weren't hot. If you do get fluid from the lines thats not your problem.
 
Top