Steve
Bronco Guru
I have a stock C4 in the EB, with an external cooler with auto temp switch and fan for cooling. The cooler is mounted under the driver's seat. I've had this setup for years and it's always cooled well.
Since the recent rebuild I've done two runs to test everything out before I paint it. The trans is working and shifting fine, but won't cool. The first run the fan never kicked on and the team got up to 240* at one point.
When I got home I drained and refilled the trans since the fluid smelled slightly burnt.
The next run the cooler fan wasn't cycling, so I stopped and jumper wired across the temp switch so the fan would run all the time. It didn't seem to help as the trans still got up close to 230* with the fan running. The cooler didn't feel nearly that hot to the touch when the temp got that high, like the pump isn't pumping enough fluid through the cooler lines.
Question: If the pump isn't working well, or at all, will the trans still work and shift properly? I've checked for kinked lines/hoses to the cooler and they're fine.
Any thoughts or advice? Do I need to drop the trans and rebuild it?
TIA
Since the recent rebuild I've done two runs to test everything out before I paint it. The trans is working and shifting fine, but won't cool. The first run the fan never kicked on and the team got up to 240* at one point.
The next run the cooler fan wasn't cycling, so I stopped and jumper wired across the temp switch so the fan would run all the time. It didn't seem to help as the trans still got up close to 230* with the fan running. The cooler didn't feel nearly that hot to the touch when the temp got that high, like the pump isn't pumping enough fluid through the cooler lines.
Question: If the pump isn't working well, or at all, will the trans still work and shift properly? I've checked for kinked lines/hoses to the cooler and they're fine.
Any thoughts or advice? Do I need to drop the trans and rebuild it?
TIA











