• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Installing new fuel tank...What else?

airbur

Bronco Guru
Joined
Jun 3, 2008
Messages
2,763
Loc.
Castle Pines, CO
So my OEM main tank is leaking and I'm getting a new one. I do not plan on EFI anytime soon. I'm probably going with the Bronco Hut's 19.5 gal tank that fits up inside the frame and doesn't hang down. Are there any other parts that I should consider replacing at the same time? Everything back there is OEM. Thanks.
 

badmuttstang

redneck grease monkey
Joined
Oct 25, 2009
Messages
2,807
might as well replace the sending unit while you have it out not sure if their tank comes with a new one or not and make sure you flush it out several times before use
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
Tank should come with a sender. Before you install it make sure you test it. Sometimes the float arms need to be adjusted to give accurate full/empty readings.
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
Thanks guys! What is involved with testing Viper?

Hook up the sender wire and a good ground. Turn the key on so the gauge works. Then run the float arm up and down to the degree that it is able when installed in the tank. Usually the float has more movement than what it can use inside the tank. Make sure empty reads empty and full reads full. Slight bending of the float arm can shift the gauge reading range up or down.
 
Top