• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Windshield support/turnbuckles

Sporto

Sr. Member
Joined
Oct 10, 2005
Messages
923
I am curious about the turnbuckle connectors that I see guys connecting their windshield frame to their cages. Does a vendor make one that connects to a basic rollbar that is behind the driver. I thought I saw something in my search on BC Broncos, but I don't think that it is what I am looking for.

I would really like to lock that frame down a bit better so my doors a more solid.

Anyone have any plans or experience building these?

Any tips or suggestions would be appreciated.

R
 
OP
OP
Sporto

Sporto

Sr. Member
Joined
Oct 10, 2005
Messages
923
Thanks that looks good...I was thinking of drilling and tapping the roll bar for this. I also am thinking of a 2" Adel clamp or using the seat belt bolts...I am wondering what material to use for the support itself. I am thinking that a turnbuckle somehwhere in each is necessary for adjusments, and perhaps allthread or something that I can use for the support itself. Then put some simple gray pipe insulation on it to make it look pretty.

I have seen some ideas that others have posted, but I am still in planning mode.

Thanks for the reply!

R
 

DrLathrop

Full Member
Joined
Oct 11, 2009
Messages
297
Loc.
Fulshear, TX
I used the turnbuckles from home depot & some large zip-ties. Cost about $5 & took 2 minutes. Windshield does not flop anymore & I didn't want to grind, weld tabs, paint over my PITA to remove Bailie Bilt family style cage. Works like a charm.
 

bronco_daddy

Full Member
Joined
Mar 6, 2010
Messages
343
Loc.
Paso Robles, CA
If you look, most just drilled/tapped into the cage. From there, you just tie into your windshield top frame which either has the holes already or the soft top bracket. I have this on my "to-do" list ..I am going with heim joints, powder coated tubing with welded nuts at each end. Simple, nice, cost effective, strong and allows a little twisting action.

All-thread was used as you can see in the pictures...you can even cover the shaft/threads with colored heat shrink, hit with a hair dryer and you have a nice look also. Definitely quick and cheap..not sure on the size they used but I am thinking 3/8... a lot of different ways to do this
 
OP
OP
Sporto

Sporto

Sr. Member
Joined
Oct 10, 2005
Messages
923
@DrLathrop
That sounds interesting...as I have already powdercoated the rollbar and I don't want to mess that up with welding, or drilling...I am looking for function over beauty in this case.

Can you post or send me pix when you get a minute? Also I am trying to secure from the rollbar behind the seats not a cage that is near the windshield itself, so it needs to have some length to it...


@BroncoDaddy
Do you think allthread will be strong enough over the two or so feet from the bar to the cage? I suspect that I will have to test it out, but I think it is...Just hate wasting money on prototypes. :(
Thanks
R
 

bronco_daddy

Full Member
Joined
Mar 6, 2010
Messages
343
Loc.
Paso Robles, CA
Could not give you an answer Sporto as that design is not how I would approach this....I am looking at the shortest distances, less interference, cleanest possible, less invasive and a system that will not lend itself to causing problems i:e; lack of flexibility with the windshield frame hence heim joints. I have not ventured down this road yet so it would be speculative but, not so keen on all-thread with that distance.

Another avenue I am looking at is urethane bumpers/block between the window frame and roll cage... with the soft top on or bikini top, it pulls hard enough anyways to keep it pulled tight tot he bumpers...I know many here have opted that route to reduce windshield frame cracking due to stiffness from stiffeners. A route I have yet to rule out and may pursue first as the EB is for around town and highway and there is so much twist from pot holes, etc.
 

Pokey71

Bronco Guru
Joined
Feb 24, 2007
Messages
1,010
Picture055-2.jpg
 

trailpsycho

Bronco Guru
Joined
Dec 11, 2003
Messages
4,856
Do a search on roll bar clamps. Three are several options... Fourtreks, Southwest Speed shop and others. There are several threads on roll bar clamps and you can find some cheaper, yet still attractive options for adding to your roll bar without drilling and tapping your cage. I used a Fourtreks one for my cage to windshield frame. I bought some 5/16" heims from a speed shop, a few 5/16" 1.25 or 1.5" bolts, some 5/16 SS all-thread and a few SS jamb nuts. Looks nice, will never rust or become an eyesore, easy to remove or adjust. Sorry no pics handy.

Good luck.
 

bronco_daddy

Full Member
Joined
Mar 6, 2010
Messages
343
Loc.
Paso Robles, CA
Excellent idea trailpsycho, I have a 5" tach to mount and I was going crazy figuring a way to mount it...saw on fourtreks how a guy did it and it looks killer...now I can see how you did yours...bar clamps and then run the heims off the side mount bolt holes to your windshield.. love it.
 
Last edited:

trailpsycho

Bronco Guru
Joined
Dec 11, 2003
Messages
4,856
Excellent idea trailpsycho, I have a 5" tach to mount and I was going crazy figuring a way to mount it...saw on fourtreks how a guy did it and it looks killer...now I can see how you did yours...bar clamps and then run the heims off the side mount bolt holes to your windshield.. love it.

That is how I mounted my tach as well. The Fourtrek stuff is really nice. A cheaper option is the southwest speed shop clamps, which are very strong, but not as versatile or as "fancy" as the Fourtreks stuff.

Good luck and have fun with it.
 

Dano 407

Full Member
Joined
Sep 7, 2007
Messages
301
Loc.
The Orange Groves
I made my own windshield brackets back in 91 with some 2"x1/4" flat bar. It bolts to the underside of the frame and to the tab I added to the roll cage. Non adjustable, so measuring things is critical.


Total cost: about $2.
 
OP
OP
Sporto

Sporto

Sr. Member
Joined
Oct 10, 2005
Messages
923
OK this gives me a lot to look at and work on. I will come up with something, and when I do, I will share.

Thanks everyone.

Rich
 

Madgyver

Bronco Madman
Joined
Jul 30, 2001
Messages
15,030
I used a couple of retaining straps. One end went to the bolt hole on the windsheild frame and the plain end was tex screw to the front cage.
 
OP
OP
Sporto

Sporto

Sr. Member
Joined
Oct 10, 2005
Messages
923
I used a couple of retaining straps. One end went to the bolt hole on the windsheild frame and the plain end was tex screw to the front cage.

@Madgyver - what kind of retaining straps did you use? I am visualizing some kind of tie down strap, and I think that would be a little too obtrusive on my setup, not to mention I think that my frame needs to come out a little bit to stretch the soft top and allow the doors to operate better. I don't have a cage up front, just a rollbar in the back. I do appreciate the input though...my mind has been working on this for the last few days.

I picked up some 3/8" all thread, turnbuckles and some other items at the Depot today. I will post some shots when I finish it...

:cool:
 

Scoop

Contributor
Bronco Old Fart
Joined
Feb 1, 2006
Messages
11,123
Loc.
Cuchara, CO
OK this gives me a lot to look at and work on. I will come up with something, and when I do, I will share.

Thanks everyone.

Rich

Hey Rich, before I installed my front cage I used lengths of 1 1/2" electrical condiut from the main hoop to the ws frame. Almost looked like part of the cage. I used some angle iron brackets which attached to the soft top windshield riser bolts. The conduit is light and strong enough to brace the windshield. I covered it in roll bar foam. Before that I had some 1" x 1/4" aluminum flat bar but it would flex at speed. Now I have some 6" turnbuckles from the top of the front legs to the ws frame.
 
OP
OP
Sporto

Sporto

Sr. Member
Joined
Oct 10, 2005
Messages
923
Hey Rich, before I installed my front cage I used lengths of 1 1/2" electrical condiut from the main hoop to the ws frame. Almost looked like part of the cage. I used some angle iron brackets which attached to the soft top windshield riser bolts. The conduit is light and strong enough to brace the windshield. I covered it in roll bar foam.

Gary,
You would not happen to have any pix of that old setup would you? How did it attach to the rollbar? The allthread that I selected is 3/8 thick, and I was thinking about flexing, but it seems pretty rigid, and I am thinking any added pressure will only make it more so...I think conduit with foam my look better than allthread though...

Thanks for the input...

R
 
Top