• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

cage to frame

blwngsket

Full Member
Joined
Feb 19, 2007
Messages
315
Loc.
Novato
I didn't tie mine to the frame because of road vibration issues and it would decrease the frames ability to flex when on the trail. I tied my seats and belts into the cage and sandwiched the bodi and cage between the A and B pillars with a pair of sliders.
I made 2x8 sliders that mount to the floor plates on the cage. I then made a mount on the top of the slider that runs the length of the door sill out of 1/4" plate and a piece of 1/8" plate sandwiches that from the top of the sill. The cage stays with the bodi unless the bodi mounts fail. The slider is made out of 2 pieces of 2x4 welded together. this gives me a 1/2" bulk head down the length of the slider for strength. Man, that was a lot of welding......

http://www.norcalbroncos.com/forum/showpost.php?p=29888&postcount=105

http://www.norcalbroncos.com/forum/attachment.php?attachmentid=8817&stc=1&thumb=1&d=1205364320

http://www.norcalbroncos.com/forum/attachment.php?attachmentid=8943&stc=1&thumb=1&d=1207530702

http://www.norcalbroncos.com/forum/showpost.php?p=39870&postcount=242

http://www.norcalbroncos.com/forum/showpost.php?p=39949&postcount=247

http://www.norcalbroncos.com/forum/showpost.php?p=39972&postcount=249

http://www.norcalbroncos.com/forum/showpost.php?p=40133&postcount=253
 

Steve83

Bronco Guru
Joined
Jul 16, 2003
Messages
9,360
Loc.
Memphis, TN, USA, Earth, Milky Way
I thought the purpose of tying the cage to the frame was to keep the cage from pushing through the floor and squishing the occupants if you flop on your roof?
Yeah, but attaching the seats to the cage accomplishes the same thing, WITHOUT transferring frame noise into the passenger compartment. And it creates a much-stronger connection from the cage to the passengers, instead of relying on thin, rusty floorboards.
 

357Bronco

Bronco Guru
Joined
Oct 13, 2006
Messages
1,001
Loc.
New Hampsha
My cage goes to the frame, I used Energy Suspension bushings, in 1.75x .120 DOM. There's pics in my gallery, on page 5. If anyone wants, I can find the part number for the bushings, I think they were for a control arm on an RX7.
 

jim3326

Bronco Guru
Joined
Jul 12, 2010
Messages
1,781
Loc.
Appleturkey
I didn't tie mine to the frame because of road vibration issues and it would decrease the frames ability to flex when on the trail. I tied my seats and belts into the cage and sandwiched the bodi and cage between the A and B pillars with a pair of sliders.
I made 2x8 sliders that mount to the floor plates on the cage. I then made a mount on the top of the slider that runs the length of the door sill out of 1/4" plate and a piece of 1/8" plate sandwiches that from the top of the sill. The cage stays with the bodi unless the bodi mounts fail. The slider is made out of 2 pieces of 2x4 welded together. this gives me a 1/2" bulk head down the length of the slider for strength. Man, that was a lot of welding......

http://www.norcalbroncos.com/forum/showpost.php?p=29888&postcount=105

http://www.norcalbroncos.com/forum/attachment.php?attachmentid=8817&stc=1&thumb=1&d=1205364320

http://www.norcalbroncos.com/forum/attachment.php?attachmentid=8943&stc=1&thumb=1&d=1207530702

http://www.norcalbroncos.com/forum/showpost.php?p=39870&postcount=242

http://www.norcalbroncos.com/forum/showpost.php?p=39949&postcount=247

http://www.norcalbroncos.com/forum/showpost.php?p=39972&postcount=249

http://www.norcalbroncos.com/forum/showpost.php?p=40133&postcount=253

Nice looking cage. Only mistake I see is the sholder harness mount should be no more than 4" below your shoulders, otherwise they don't work.
What is the air chuck for, an air tank?

Jim W.
 
OP
OP
B

Bronkster

Full Member
Joined
Jul 11, 2006
Messages
346
Thanks for all the feedback guys. Seems like another 1 of those topics with varying opinions. I'll let you know what I decide although I am planning to race and am leaning toward at least 4 points being anchored to the frame through some type of bushing.
 

blwngsket

Full Member
Joined
Feb 19, 2007
Messages
315
Loc.
Novato
The most important thing in shoulder harness attachment is the angle at which they exit the seat and route to their lower attachment point. If they go straight down to the floor you risk back injury in a roll over. I don't remember the angle numbers, but I researched it and used the manufacturers suggested angle. I then put in the cage bar so that the strap draped over it at the proper angle before dropping down to the mounting point.

http://www.norcalbroncos.com/forum/showpost.php?p=29576&postcount=97

I wanted to make sure that it doesn't go straight to the floor. I like my back just the way it is.........

Yes, the sliders are air tanks.
 

jmhend

Bronco Guru
Joined
Dec 25, 2007
Messages
2,768
The only thing I was afraid of was how well the fiberglass tub would hold up. When I look at Greg and blwngsket's setup it would be very hard for the entire cage to push though. However, I have an older fiberglass tub which does not have metal reinforcement it has wood. Just want to keep my family safe in any event.
 

enigma2552

Jr. Member
Joined
Feb 8, 2008
Messages
78
Loc.
Lng Val, NJ
Just to make sure; I think everyone needs to come to a mutual understanding of what is being talked about. I see everyone using the term "rollcage", which is an actual "cage" around the entire driver compartment. Hoops with bars running across the floor or such to enclose everything in to a "cage". Attaching the cage to the frame through the body provides further support and rigidity if you so desire...

Another version of protection in vehicles are the "roll bars" that we see a lot in our Broncos. Those usually run up and over and attach to the floor. The reason people tie those to the frame is to effectively turn them into a cage using the vehicle frame to provide the connections across the bottom of the pillars. Of course, I'd recommend running tubes above the floor between pillars to attach seats and belts to in order to protect against the body separating and messing you up.

Granted, certain materials, such as metal tub vs glass would lend people to beef up the attachments only because I picture (and maybe this is just my old school thinking) the glass body disintegrating in a really bad crash...

Either way, cage detaching or staying with the body/frame per your own design is your own preference, but just thought I'd throw it out there so that everyone is on the same page regarding probably why things are done the way they are...

Then again--I could be entirely wrong.;)
 

trailpsycho

Bronco Guru
Joined
Dec 11, 2003
Messages
4,856
I can say from my experience that I saw no increase in vibration, noise or other deleterious effect in my set-up. I have a full cage tied into the frame at the A (front), B and C points, so six points of contact to the frame. The frame connectors are welded to the frame--no bushings-with a plate on the underside of the floor and the cage sandwhiches the floor. Would bushings be better? Maybe, but I havent noticed any issues. The truck rides great and is only "loud" because I choose to run in safari-mode most of the time.

Captain Obvious would like to add that its not advisable to have the seat attached to the cage unless the seat belts are as well. May seem like a stupid thing to have to say, but sadly, there are examples out there.
 

buckintone

Sr. Member
Joined
Aug 25, 2010
Messages
493
Loc.
Carlsbad
Yeah, but attaching the seats to the cage accomplishes the same thing, WITHOUT transferring frame noise into the passenger compartment. And it creates a much-stronger connection from the cage to the passengers, instead of relying on thin, rusty floorboards.


What??:? a no...it... doesn't? If your upside down, the entire force of a flip and weight of the...well everything! including the tub, is going to focus on the top of the cage, in turn pushing the mounts through the 16 gauge sheet metal(probably rusty) floor and then crush your arss first through your head and then into the ground...right? The more connected the entire structure, the more energy is dissipated through various extremities (springs and axles) and all the parts of the vehicle as a whole. Honestly and with all due respect, Steve83, greg and anyone else who thinks a cage should separate from the rest of the vehicle, is utterly wrong. also speed boat analogy???%)

By the way, one of the guys at TBP just told me, a friend of his just got out of the hospital. He broke his kneck when he rolled his bronco on the street and his cage punched through the weak, rusty floor boards and crunched him:(
 

Steve83

Bronco Guru
Joined
Jul 16, 2003
Messages
9,360
Loc.
Memphis, TN, USA, Earth, Milky Way
...crush your arss first through your head and then into the ground...right?
Wrong. At worst, the cage (with seats) would punch thru the floor to the frame, and stop when the frame & cage meet. Then as it continues to roll, the chassis will rip away from the cage, leaving you unharmed inside it.
The more connected the entire structure, the more energy is dissipated through various extremities (springs and axles) and all the parts of the vehicle as a whole.
Wrong again. No energy is dissipated if you keep all the mass connected. If you let the heavy stuff go away, you lose energy exponentially.
...his cage punched through the weak, rusty floor boards and crunched him:(
Were his seats & belts connected to the cage? Got pics?
 

buckintone

Sr. Member
Joined
Aug 25, 2010
Messages
493
Loc.
Carlsbad
Wrong. At worst, the cage (with seats) would punch thru the floor to the frame, and stop when the frame & cage meet. Then as it continues to roll, the chassis will rip away from the cage, leaving you unharmed inside it.Wrong again. No energy is dissipated if you keep all the mass connected. If you let the heavy stuff go away, you lose energy exponentially.Were his seats & belts connected to the cage? Got pics?

The seat connected to cage thing sounds good, but that's where it ends. I'm sure he is well intended, but he is no expert. Anyone who's considering steve83's advise on this should ask him for a list of his credentials. He simply does not know what he's talking about. Actually, i'm not a physics engineer either, but i'm also not offering build safety advice! On the other hand, i do know wrong when i see it, and his ideas fly contrary to all the fundamentals of physics! As a mistake in this area can cost someone their life, I felt compelled to share my observation with my fellow bronco bretheren:) Now steve83 can do the last word thing, I've said my piece, over and OUT!
 
Top