• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Engine Recommendations?

HotWheels

Bronco Guru
Joined
Jul 8, 2003
Messages
9,179
Loc.
Twilight Zone
Hi all,

Getting ready to start another Bronco; this one out of fiberglass for life on a tropical island.

Just need to make sense of engine selection for that purpose.

Considering diesel as well as this rig will be built from the ground up.

I am not looking for a firebreather here just a simple engine, perhaps a lite one that will improve the front/rear weight distribution and be long lasting.

diesel?

Thanx!
 

Devin

Bronco Kineticist
Joined
Apr 29, 2004
Messages
3,956
I am not looking for a firebreather here just a simple engine, perhaps a lite one that will improve the front/rear weight distribution and be long lasting.

diesel?

Thanx!

"Light" and "diesel" are generally not associated with each other. I would agree with Bax. Just go with a 302.
 

73azbronco

Contributor
Bronco Guru
Joined
Nov 11, 2007
Messages
8,782
240 six if your frame is set for that, otherwise a 302 is more than fine cruising the beaches...
 

lowbush

Bronco Guru
Joined
Sep 13, 2010
Messages
1,807
Loc.
Summerland Key, FL
As far as diesel I would go with a 4BT or a Mercedes OM617. A 4BT is going to be pricy due to popularity. The OM617 is going to be a heck of a lot cheaper, you can find runners in the junk yard for $200 to $300.
 

englewoodcowboy

Lick Creek Restorations
Joined
Jul 25, 2010
Messages
4,201
300 I6 efi.

X2 My thoughts exactly... The 300 has lots of low end grunt and is a tad lighter than a 302. Toss a NV3550 behind it and you should get some respectable numbers and be capable for mild off-road....
 

lowbush

Bronco Guru
Joined
Sep 13, 2010
Messages
1,807
Loc.
Summerland Key, FL
X2 My thoughts exactly... The 300 has lots of low end grunt and is a tad lighter than a 302. Toss a NV3550 behind it and you should get some respectable numbers and be capable for mild off-road....

I saw an article that said dollar for dollar you get more money to power out of an I6 with a supercharger. As well with the Bronco there is only so much power you really need. I have a crate Ford Racing 390 in mine and I can tell you that it is too much engine, if I had not bought the frame with the power already in it I would have opted for something a lot different. I would have went with an inline diesel turned up to about 250-300 HP or one of the warP 13 all electric drives. That being said eventually I am going to sell the 390 and pick up a diesel, but I want to drive the truck for a little while before I immobilize it again.
 

trailpsycho

Bronco Guru
Joined
Dec 11, 2003
Messages
4,856
I would agree that the 300 I6 with EFI would be a cool option, BUT, even though this a frame up build...there is some facrication required and, if I remember correctly, some firewall mods needed due its length.

The most sense is a 5.0 EFI motor. Good power, reasonable economy, excellent reliability. And excellent availability for parts and service.

If you could find a small diesel (not the 4 bt), that might be an option. I know for a while there was a guy on the east coast importing some small Ford 4 cyl diesels from Brazil that included harnesses and all for ~$6-7K on ebay...but I never heard of anyone that bought and installed one in a Bronco.

The 4bt rquires alot of custom work, OK-no problem, but its loud, and knowing how picky you are, you wont be happy with it. A 5.0 can be outfitted with a quiet exhaust and make for a great driver with ample power.

On the flip, if you want something "special", talk to Tumblin Automotive about doing a 4.6L supercharged 5 spd auto for you...they just finished up a wicked one that they showed video for here on CB in the last 2-3 months. That would make for a great powerplant and might--I said might--get you in the mid to upper teens around town and cruising. Low teens is reasonable with a 5.0, but mid and upper teens is rare...depending on driving style, grade and how good of a liar you are.

If money is not a problem, I would look into what it would take to swap in the new ECOBOOST. I would believe 20 mpg is possible and you should still have a great seat-of-the-pants feel while driving.
 

lowbush

Bronco Guru
Joined
Sep 13, 2010
Messages
1,807
Loc.
Summerland Key, FL
I would agree on the 4BT even though I am seriously considering one for my truck. The engine, adapter + custom oil pan and all the rest of the items needed can be had for half the price of just a rebuild-able 4BT engine. The 4BT has become a victim of it's popularity and in my opinion has become overpriced for what it is, don't get me wrong it is probably the best 4 cylinder diesel ever made, but the best price I have seen for a re-builder is $1500. Shopped well, an OM617 + some good upgrades, could be in the truck for right at a grand. They are about as bullet proof as the 4BT, lighter, more fuel efficient and have about the same longevity. The only reason I am considering the 4BT or a small CAT is because I can sell the 390 for about the same amount of money. If that where not the case the OM617 would be my first pick.
 

Boss351

Sr. Member
Joined
Nov 23, 2007
Messages
510
Loc.
Foxboro
351w flat top piston w/64cc heads w/BC 5.0 adapter w/5.0 top half mass air efi 2 into one exhaust with 3550 5spd uncut fender hot rod black sleeper. Just my .02$. Harley edition 5.4 w/supercharger w/3550 Just my .03$
 

Ranchtruck

Sr. Member
Joined
Feb 7, 2008
Messages
768
The jap box trucks can often be found for cheap with decent turbo diesels in them. Hino, Fuso, Nissan, Isuzu, all have compact medium duty 4cyl diesels that would power a bronco just fine. They're equivalent to a 4bt in size.
 

.94 OR

Contributor
Bronco Guru
Joined
Jul 5, 2009
Messages
2,215
Loc.
Willamette Valley, OR
Wonder what a new 3.7 Liter Ecoboost V-6 would run. That could be interesting with the available torque and mileage it could generate.
 

KyleQ

Bronco Guru
Joined
Apr 24, 2008
Messages
5,480
There is a 4.6 build - spendy and not a lot of room with those DOHC heads.
 
Top