• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Engine Recommendations?

lowbush

Bronco Guru
Joined
Sep 13, 2010
Messages
1,807
Loc.
Summerland Key, FL
Anyone here use a diesel?

I am just getting into the early Bronco's but I put a 4 cylinder CAT in my old k5 blazer and a 4BT in a Scout. The rolling chassis I bought had a crate Ford racing 390 installed in it, and after I drive it and enjoy it for a while I will be either putting a diesel or a warP electric motor in it. If I can get the batteries work out to give me at least 4 hrs of driving time I am going to opt for electric because you get more HP for you money. The warP 13 produces 400 to 1000 HP and 2400 ft lbs of torque. The nice part about electric is the swap is relatively easy due to the fact that you can use the transfer case as a reduction gear, you just pull the transmission and engine and adapt the electric motor to the transfer case. We will see but right now I am leaning towards a small diesel because it is what I know. Still tossed up between a 4BT or a OM617 Mercedes.
 

lowbush

Bronco Guru
Joined
Sep 13, 2010
Messages
1,807
Loc.
Summerland Key, FL
Do you have a thread going on this subject by any chance? Interesting subject...

No, I will most likely document the swap when I decide to do it. I took pics of the two other swaps with my phone and my phone died with them on it. A hard lesson to learn about backing stuff up. Anyways my grandfather was a diesel guy, we swapped diesels into everything. They have a great power profile for trucks so I always leaned towards them when my gas engine gets tired. But I have been doing a lot of research on the electric motors because their power profile is insane. almost 100% torque at very low RMP's we are talking below 500 RPM's and 2400 ft lbs of torque (on the warP 13). That is a perfect power band for wheeling. I have been thinking if I pull the transmission I could mount the motor where the tranny was and use the engine comportment for a battery bay. with lithium Ion, nickel cadmium, or Nickel-metal hydride and all the space of the engine bay, I think I could get it up to a reasonable run time. If I can get 4 hrs of highway operation out of it, it will certainly last 8 at low speed wheeling. I sold my donor Bronco that I was going to put an electric in because I have too many project going on as it is. But I keep thinking that it could be done in a small 4x4 with good results. There is plenty of room for the batteries you will need, the swap is the easiest one to do, I helped a buddy swap an electric into an old Porsche project he had and it was a very easy swap far less involved than a diesel swap. Anyway, I have time to think and plan, I am not going to start hacking on my Bronco just yet, I am about to get it street legal and want to drive it for a while before I put it back in the garage.
 
OP
OP
HotWheels

HotWheels

Bronco Guru
Joined
Jul 8, 2003
Messages
9,179
Loc.
Twilight Zone
I am really torn. I would love to try something that could run off bio-diesel but am more familiar with the 5.0s. Be cool to get 20+ outta the Bronco. Am I dreaming?
 
Top