• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Slots installed broke two lug nuts!!!!

casadejohnson

Bronco Alchemist
Joined
Jan 21, 2005
Messages
3,587
I got my lug nuts for my slots today. Ordered Gorilla lug nuts ( Made in the USA ) because I have had them before and been very happy with them. Mounted all of them and then checked them all with the torque wrench. Lug nuts are new and it was driven about 20 feet. The two lugs that broke snapped at about 85-90 Ft LBS. When I removed the wheel, I was able to unscrew the broken off shank by hand so they did not bottom out. I'll be calling the company tomorrow for some replacements. Here are some photos of the slots mounted up and the broken lugs.
 

Attachments

  • IMG_4973.jpg
    IMG_4973.jpg
    94.7 KB · Views: 175
  • IMG_4974.jpg
    IMG_4974.jpg
    90.6 KB · Views: 179
  • IMG_4957.jpg
    IMG_4957.jpg
    79.6 KB · Views: 208
  • IMG_4958.jpg
    IMG_4958.jpg
    67.4 KB · Views: 168
  • IMG_4960.jpg
    IMG_4960.jpg
    66.3 KB · Views: 171
  • IMG_4964.jpg
    IMG_4964.jpg
    73.8 KB · Views: 171
  • IMG_4959.jpg
    IMG_4959.jpg
    73.8 KB · Views: 150

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
I always use 75lbs for 1/2" lug-nuts, but then, I don't have shanked nuts on any of my rigs either.
Even still, breaking at that low of a torque is suspicious at the very least. Should be way more safety-factor built in I would think.

Paul
 

iwlbcnu

Contributor
Bronco Guru
Joined
Nov 1, 2001
Messages
3,349
Sounds like your studs may not be long enough to get into the head of the lug. The shank is the weak link. In drag racing, the stud must stick out of the lug 2 threads to be legal when using shanked nuts. Something to think about.
 

tasker

Contributor
all knowing of nothing
Joined
Jun 2, 2006
Messages
21,707
Loc.
NH
great looking rig, sure hope you get it resolved. I use a conical seat closed end nut on mine....
 

kayakersteve

Sr. Member
Joined
May 24, 2010
Messages
882
Loc.
Western NY State
I agree with previous post taht stated the studs are likely too short - You should check this as you could have more failures if it is the case.
 

Chief Master Sergeant

Retired U.S. Air Force
Joined
Nov 6, 2002
Messages
5,222
Brother, how many Broncos do you have now? Looks like your garage is packed with them. ;D Love the way the slots look.
 
OP
OP
casadejohnson

casadejohnson

Bronco Alchemist
Joined
Jan 21, 2005
Messages
3,587
Sounds like your studs may not be long enough to get into the head of the lug. The shank is the weak link. In drag racing, the stud must stick out of the lug 2 threads to be legal when using shanked nuts. Something to think about.

I wondered about that, I have never had the shank lugs before. How far into the lug head do they need to go?
 

rmfreeze

Sr. Member
Joined
Nov 10, 2005
Messages
742
Loc.
Benton, Arkansas
I wondered about that, I have never had the shank lugs before. How far into the lug head do they need to go?

Thread one of the shanks that broke back on and see how much of the stud sticks out. I would say a few threads should be good enough. More than likely you were torquing the head of the nut with no threads up into the nut from the shank. I've used Gorilla shanked lug nuts like that on another application where I torqued closer to 100-110ft lbs with no issues.
 

broncodriver99

Bronco Guru
Joined
Jan 27, 2008
Messages
4,780
Loc.
Glen Allen, VA
Those slots look great. Sorry about the busted nuts. ;D

Please post up whatever you find out. Would be nice to know if I need to change my studs before I mount mine. Will probably use a similar lug.
 
OP
OP
casadejohnson

casadejohnson

Bronco Alchemist
Joined
Jan 21, 2005
Messages
3,587
Great looking Bronco! Off topic...What kind of front bumper are you using?

The guy I bought it from several years ago said it was made by the students up at WyoTech. I thought it was a one off type of thing but have seen two more exactly like it.
 
OP
OP
casadejohnson

casadejohnson

Bronco Alchemist
Joined
Jan 21, 2005
Messages
3,587
Discount Tires torques all lug nuts @ 100 ft lbs. Stand practice.

I have always used 100Lbs before on regular lug nuts but I actually looked it up before I tightened these up and 75-85 Ft/Lbs was recommended for 1/2" studs. I got a set of non locking Lugs as well so I'll use them for now. I talked to the guys at Gorilla today and they asked me to send photos to them. He said getting me a new set would not be a problem but wanted the pics and a copy of my paperwork showing that I just purchased them. I'll get that sent off tonight.
 

bigjhoov

nobody
Joined
Apr 10, 2005
Messages
3,583
You can't put 100lbs on shanked lugs and slots. I keep mine at 65lbs or so. Anymore than that and it seems to start distorting the washers.

Toddz had a thread about this a year is so ago because they runs slots on their racer and were having similar issues.
 
OP
OP
casadejohnson

casadejohnson

Bronco Alchemist
Joined
Jan 21, 2005
Messages
3,587
You can't put 100lbs on shanked lugs and slots. I keep mine at 65lbs or so. Anymore than that and it seems to start distorting the washers.

Toddz had a thread about this a year is so ago because they runs slots on their racer and were having similar issues.


Really, only 65 Lbs? That's good to know, any problem with the lugs loosening over time? I just came in from the garage and swapped all my lugs over to the non locking one I have. I'll have to look for the other thread That Todd had.
 
Top