• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Sounds like birds are chirpin'...

Bundy

Bronco Guru
Joined
Jan 10, 2009
Messages
2,045
I had this noise coming from the bronco that literally sounded like birds chirping both on acceleration and deacceleration. I jacked up the front and engaged only the front axle and got nothing and when I did the same for the rear, I heard the birds again.

It's definitely coming from the rear driveshaft area, I just don't know if it is the U joints or if it the pinion shaft of the D20 (I have had that pinion nut come off awhile back)

Has anyone heard the sound of a U joint dying and does it sound like birds chirping? I'm just curious as I haven't taken it off and run it without the driveshaft to see if it is the D20 chirpin. (it's a custom slip-type from National Driveline)
 

kayakersteve

Sr. Member
Joined
May 24, 2010
Messages
882
Loc.
Western NY State
Great thread! I think I have the same chirp - I have new U-joint but didn't replace the cv portion. I was wondering about the CV portion or the output shaft on the T-case???
 

badmuttstang

redneck grease monkey
Joined
Oct 25, 2009
Messages
2,807
I did have the same chipping from the cv u-joints replaced mine and it went away. Try and grease them and see if it get quieter if so replace them in the end its a lot cheaper then breaking them.
 
OP
OP
Bundy

Bundy

Bronco Guru
Joined
Jan 10, 2009
Messages
2,045
Kinda what I was thinking too- doubtful the D20 is the cause of the bird chirp as I'm sure my U-joints must be 10 years old.

Looks like I'm off to have National put a couple of fresh greasable U joints in
 

barronj

Bronco Guru
Joined
Jun 6, 2009
Messages
1,859
First thing that comes to mind is the throw-out bearing, but this is also my first real 4wd, and first classic car.
 

fungus

Bronco Guru
Joined
May 27, 2009
Messages
1,548
Loc.
Kaneohe Bay, Oahu
I thought I had a canary in my rig too. I lubed the speedo cable and killed it! No more chirp. Just another thing to look at...
 
OP
OP
Bundy

Bundy

Bronco Guru
Joined
Jan 10, 2009
Messages
2,045
First thing that comes to mind is the throw-out bearing, but this is also my first real 4wd, and first classic car.

I eliminated the clutch/TO bearing using my awesome deductive reasoning skillz (AKA I've thrown a shitload of money and parts at something that the problem wasn't) and have learned to make sure I know what's wrong before my dumbass tries to fix it... plus I can actually hear the general area of concern when it was up on jackstands :D

I thought I had a canary in my rig too. I lubed the speedo cable and killed it! No more chirp. Just another thing to look at...

Damnit John, don't tell me that! LOL
 

fungus

Bronco Guru
Joined
May 27, 2009
Messages
1,548
Loc.
Kaneohe Bay, Oahu
Ryan,
mine would speed up and slow down with speed. I figured it wasn't anything in the drivetrain as it was directly mph related and all my ujoints looked good. It would also do it with the clutch pushed in just rolling down the road and wouldn't change frequency when gears were shifted. Lubed the speedo cable and problem solved! $2 and change for some graphite cable lube at Napa... A cheap and easy trouble shooting step if you wanna give it a shot.
 
OP
OP
Bundy

Bundy

Bronco Guru
Joined
Jan 10, 2009
Messages
2,045
Ryan,
mine would speed up and slow down with speed. I figured it wasn't anything in the drivetrain as it was directly mph related and all my ujoints looked good. It would also do it with the clutch pushed in just rolling down the road and wouldn't change frequency when gears were shifted. Lubed the speedo cable and problem solved! $2 and change for some graphite cable lube at Napa... A cheap and easy trouble shooting step if you wanna give it a shot.

Oh hell yeah I'm gonna try that- I'm gonna drive it again when I get home... it did change frequency with accel and deaccel (like a different bird) but I didn't notice with gear change as my rig is so loud.

Good call though! You start on that stretch yet?
 

GrillMaster

Contributor
Bronco Guru
Joined
Jun 5, 2008
Messages
2,505
You could unbolt the driveshaft to see if it goes away. I too in the past have been a dumbass and replaced shitloads of parts trying to find a problem. Take your time, you will find it.

could spray some lube on things to see if it stops it. If noise from u joints, I would replace.
 

fungus

Bronco Guru
Joined
May 27, 2009
Messages
1,548
Loc.
Kaneohe Bay, Oahu
Oh hell yeah I'm gonna try that- I'm gonna drive it again when I get home... it did change frequency with accel and deaccel (like a different bird) but I didn't notice with gear change as my rig is so loud.

Good call though! You start on that stretch yet?

Yep but stretch got cancelled. Don't need it with the "new" seating plan ('99 Ranger 60/40 front & FSB fold & tumble rear). Gives me alot more options for tops too w/o going totally custom ($$$). Got my roller 351 back from hone/ cleaning and getting ready to put it back together. '94 full roller 351W, Edelbrock alum heads (2.02/ 1.60 valves), Comp 35-308-8 5.0L cam, Scorpion 1.6 roller rockers, GT40 lightning lower, tubular GT40 upper, blah, blah... She's gonna be a monster! I AM going to push the rear end back as far as I can (4-5") to stretch the WB w/o getting into the rear tank. Still goin' with the NP-435 w/ Jed's short shaft 203 adapter as well as his 203/ 205 adapter. 4.88s and Detroits front and rear.;D
 

casadejohnson

Bronco Alchemist
Joined
Jan 21, 2005
Messages
3,587
I had the chirpin' bird in the rear driveshaft a few weeks back. On mine it was the center joint in the CV joint. I had to remove the driveshaft to get at the center fitting but that fixed it. I think that the center joint gets neglected alot of the time because the access to it is not great and some of them require a needle style grease fitting instead of the standard Zerk fitting. This is the type of grease nozzle I used on mine.

http://www.amazon.com/Lincoln-Lubrication-5803-Grease-Needle/dp/B0002SR6XE
 

71massbronco

Bronco Guru
Joined
Mar 13, 2011
Messages
1,321
Lube speedo cable??? How do you do that??

There's a small retainer nut and bar that holds the speedo in the tcase. just remove the screw, retainer clip comes out and the speedo cable pulls right out. I imagine it would take some man-robatics (I just made that up;D) to get at it. Mine was easy since I had the tub off the frame. Shoot some lube down the gullet and on the gear and you should be good to go.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
All good stuff Bundy. Many a speedo cable has caused the replacement of perfectly good driveline parts!

But no matter what, lube those u-joints!
I've found that u-joints don't always make the same noise. In some cases very different noises. And in some cases (like my CV centering ball) they make no noise at all, but vibrate like the dickens.
So lube it all, and see what happens. Bad or not, u-joints need regular maintenance.
Then they still wear out...

Paul
 

Slim

Jr. Member
Joined
Apr 12, 2010
Messages
119
Loc.
Costa Mesa
Does it chirp mostly under acceleration? If so, I bet it is a joint. Remember, just because the ujoints look good doesn't mean they are. Even if you got under the rig and tried to twist the drive shaft back and forth you may not feel anything. From my experience, once you hear the chirps and it is a joint you have few miles left until they blow at a very inopportune time.
 
OP
OP
Bundy

Bundy

Bronco Guru
Joined
Jan 10, 2009
Messages
2,045
So I took the shaft in and the driveline shop said the CV was done and unfortunately the shaft had begun to twist... so I ended up having them make me a new driveshaft that looks like it's 3" with a gigantic slip with some serious splines- it's gotta be overkill!

I had them also fix the CV on the old driveshaft to have as a trail spare to which the owner of the shop commented "If you break that new shaft, you're getting pulled out of wherever you are so that old shaft won't do much for you." ;D
 

fungus

Bronco Guru
Joined
May 27, 2009
Messages
1,548
Loc.
Kaneohe Bay, Oahu
I had them also fix the CV on the old driveshaft to have as a trail spare to which the owner of the shop commented "If you break that new shaft, you're getting pulled out of wherever you are so that old shaft won't do much for you." ;D

Well, once you get "pulled out" from where it broke, the spare will get you off the trail and back home!!!
 
Top