Mike Matthews
New Member
- Joined
- Aug 9, 2010
- Messages
- 6
Can anybody give me some advise on having my computer tuned? I have a 1977 Bronco that I put an 1993 5.0 injected engine in using a RJM harness.
The engine has alum. Edelbrock heads, z303 cam, standard bore with fordged Mahle pistons, tublar GT-40 intake, 70mm throttle body, 65mm mass air tuned to match the 24lb injectors, everything was professonally ported and is all brand new, including all new sensors. It does start and run well, but for all that is done, I feel like it should have more. The rest of the Bronco has a, C4 with 3000 stall, all B+M guts, 4.88 gears, and 35'' tires on alum weld wheels. ANY help is appricated
The engine has alum. Edelbrock heads, z303 cam, standard bore with fordged Mahle pistons, tublar GT-40 intake, 70mm throttle body, 65mm mass air tuned to match the 24lb injectors, everything was professonally ported and is all brand new, including all new sensors. It does start and run well, but for all that is done, I feel like it should have more. The rest of the Bronco has a, C4 with 3000 stall, all B+M guts, 4.88 gears, and 35'' tires on alum weld wheels. ANY help is appricated











