Anybody used this radiator?

[JDJ]

I am currently installing EFI on my Bronco. I was curious if anybody had used this radiator from ebay? If you have used it, what is your experience with it, Good or Bad?

http://www.ebay.com/itm/3-ROW-CHAMP...Parts_Accessories&vxp=mtr&hash=item2eb9a42761

 

[Kirk K]

Here is the same radiator a little cheaper.

http://www.ebay.com/itm/1966-1977-F...Parts_Accessories&vxp=mtr&hash=item1c1b98cf66

 

[Hank_]

Here is the same radiator a little cheaper.

http://www.ebay.com/itm/1966-1977-F...Parts_Accessories&vxp=mtr&hash=item1c1b98cf66

This radiator is for a standard bronco motor. He is fuel injecting his so the inlet and outlet are on opposite sides. The one in his link is correct.

Henry

 

[ilovemaui]

I am currently installing EFI on my Bronco. I was curious if anybody had used this radiator from ebay? If you have used it, what is your experience with it, Good or Bad?

http://www.ebay.com/itm/3-ROW-CHAMP...Parts_Accessories&vxp=mtr&hash=item2eb9a42761

That's a great price. I'd be curious to see how it works out.

 

[aliensecretion]

I bought my champion from this guy on ebay. Love the radiator, great price and they had great service. I didn't see yours currently listed, but you might msg him and tell him what you need. http://myworld.ebay.com/christianradiator/

 

[Kirk K]

This radiator is for a standard bronco motor. He is fuel injecting his so the inlet and outlet are on opposite sides. The one in his link is correct.

Henry

I was just testing you.
Just kidding. Thanks for the correction.

 

[av bronco]

I have a champion, very happy.

 

[Hank_]

I was just testing you.
Just kidding. Thanks for the correction.

Thanks for taking the time to try to save someone money. I may pick up one of these myself. I need one for 351 I am installing.

Henry

 

[JDJ]

Does it matter if the transmission cooler lines enter and exit on the same side as the radiator inlet?

 

[av bronco]

Does it matter if the transmission cooler lines enter and exit on the same side as the radiator inlet?

That's the way the orignal ones are.

 

[ryoungbronco]

I'm very happy with my champion radiator.

 

[JDJ]

That's the way the orignal ones are.

.

I didn't know that. My rig has 3 spd on column . Thanks for the info .

 

[broncodrew]

i went with the 2-row...no problems on my end. Looks great and functions well. Pull the trigger...

 

[fordguy]

read on his webpage where he gives discounts aka mass buys to car groups.

 

[JDJ]

read on his webpage where he gives discounts aka mass buys to car groups.

10-4 will do. It would be sweet if we could get a mass buy going....I'll see what I can do. If he will do it, I will start a new thread on here about it for sure!

 

[fordguy]

i and i most likely will get in on it if you start it. lifetime warranty is not bad ;D

 

[Hank_]

If you do a mass buy I am in for sure.


Henry

 

[J-man]

I just bought one they look like well built radiators. Does anybody know what mounts to use the 2 core or 4 core?

 

[surfer-b]

I just bought one they look like well built radiators. Does anybody know what mounts to use the 2 core or 4 core?

I bought this one( http://www.ebay.com/itm/NEW-ALL-ALU...Parts_Accessories&vxp=mtr&hash=item3f0fd43b91 )
and used the James Duff 4 core supports, they worked perfect, the ones from Graveyard did not fit at all. I would guess they are the same radiators, all made in china. However so far it has worked great.

 

[mattt]

I may be in for the mass buy as well. I could help with the logistics of it as well since his shop is probably 2 miles away from me.