• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

4BBL Intake & 2BBL Carb?

Tedster100

Chairman of the Bored
Joined
Aug 25, 2010
Messages
1,762
For reasons I won't go into I'm pulling my intake and heads to do a little investigating. I was thinking about putting on a new aluminium 4BBL intake so I could upgrade the carb at a later date. Right now I don't want to shell out the cash for a whole new carb and don't want to add another variable to my engine at this time.

Summit has the intake and a new EGR plate that looks like it would fit the bill. Has anyone done this? Would there be any issues?
http://www.summitracing.com/parts/EDL-2121/
http://www.summitracing.com/parts/EDL-8057/
 

Explorer

Bronco Guru
Joined
Mar 2, 2008
Messages
4,390
Loc.
Raphine, Virginia
Not saying it's an ideal arrangement, but I did the same thing on my last project to get it running and break in cam since I knew my carb was good. The intake can be had at Advance store sometimes for $100. You still need the 4v to 2v adapter, Mr Gasket makes those and also locally available. I just did away with the carb spacer/EGR plate.
 

Attachments

  • 306ci.jpg
    306ci.jpg
    150.8 KB · Views: 78

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
Unless you want the EGR for some reason i would just go with a standard adapter. might want to double check that egr adapter to make sure it even fits a 4v manifold.
I made my own adapter once out of plate steel. Of course that was only used for a short time to work out some bugs.
If you really want to use the 4v manifold I would consider finding a 4v carb on craigslist or something you can usually get them for around $50 While you might not want to add a varible to your engine you are adding a varible any way you look at it with both the intake and a 2v carb. While there's usually little differance in how it runs sometimes 2v carbs and 4v manifolds do run differently.
 

KyleQ

Bronco Guru
Joined
Apr 24, 2008
Messages
5,480
Holy CRAP that is an expensive intake - quite a few mustangs came with factory 4bbl intakes that can be had for DIRT cheap. (I paid $20 for mine)

Spend that money on a truck avenger - you are going to want the power of going 4 barrel.
 
OP
OP
Tedster100

Tedster100

Chairman of the Bored
Joined
Aug 25, 2010
Messages
1,762
Found one on craig's list. Going to look it over tomorrow!
 
Top