• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

LOWERING my Bronco

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
yet another, any idea where it is. It looks simmilar to the turquoise one I wonder if it was finally sold and painted.
 

77bronco_ed

Bronco Guru
Joined
Jul 3, 2004
Messages
1,793
Marty did those engine mounts work out well for you? I am looking for simplicity...
If it makes it easy I may pick up a set. I'll have to get a hold of that shop.

Do you have the body sitting on the frame yet. It would be nice to see pics of the clearance engine to fire wall

Thanks
 
Last edited:

77bronco_ed

Bronco Guru
Joined
Jul 3, 2004
Messages
1,793
Bill how much room did the external oil filter take when mounted in place of the oil filter?
I think I will need to buy the external filter and mount the starter before starting on the engine mounts. I think I'll just have clearance out the member.
 
Last edited:

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
It's bout 2.5 in off the block but depending upon where the lines come out of it there may be less room.
 

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
Worked on mine a little hit an issue with the drivers side fender. It's made wrong. ImageUploadedByTapatalk1341722527.386487.jpg this photo shows the issue with it the support is off by 5/8 " compared to the passenger side. ImageUploadedByTapatalk1341722634.624644.jpg and the passenger side of the core support needs to be trimmed as well. Hopefully all I will need is another new fender.
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Marty did those engine mounts work out well for you? I am looking for simplicity...
If it makes it easy I may pick up a set. I'll have to get a hold of that shop.

Do you have the body sitting on the frame yet. It would be nice to see pics of the clearance engine to fire wall

Thanks

I am on the mend. Had another injection in my elbow on the same arm that I had shoulder surgery (2nd time). If this one doesn't take then the elbow needs repaired also. I will wait til Christmas break for that (again). They will have to clean it out and reattached the tendon to the elbow. I would cross my fingers but that hurts too. :p

Anyways, I hope to get back working on the project very soon. I have to get Old Red ready for the trip back out to Deadwood the end of next month. Believe it or not, the wife wants to go topless this year (the Bronco ... but hey ... who knows?).

The motor mounts I bought were nice and rigid. They were made right and although pricey, I am happy with them. After all this time I waver back and forth but would really love to get the 4.6 DOHC going in this truck.

Truxedo emailed me just yesterday (they are located in my town) and they want the drawings and a few pics of the filler bracket that I made to fill in behind the halfcab so I could mount their cover over the bed. It actually turned out great, and only took about 1/2 hr to install the cover.

I have rambled on enough but figured I would post something so anyone that might be wondering knows that yes I am alive and kicking. My goal is to have the hotrod Bronco going by next summer and making it to at least a couple Bronco events. Whatever the outcome, I promise to drive it like I stole it! :cool:
 

77bronco_ed

Bronco Guru
Joined
Jul 3, 2004
Messages
1,793
Thanks for posting... Sorry to hear about the arm... Hopefully the injection will work.
Best to refrain from any difficult effort as I am sure you are doing. The Bronco we be there when you are ready to move on it again ;)

Take care,
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Well I mounted the spacer I machined for the Truxedo cover. It fit great and measures exactly the same corner to corner. It is 56" across by 42.5" front to back. I know it's not much progress, but it is another step in the right direction.
 

Attachments

  • 100_7521.jpg
    100_7521.jpg
    59.2 KB · Views: 134
  • 100_7525.jpg
    100_7525.jpg
    75.7 KB · Views: 156

01Dudley

Sr. Member
Joined
Jul 16, 2012
Messages
974
Loc.
Knoxville
Let us know when you get ready for your LOKAR shifter, throttle cables, dipsticks, etc. Duff's is authorized dealer for LOKAR and their products will look great on there. Oh and we might have the billet pedals available by then also!

We also have the composite headlights in fluted and tribar design for $145. Kit comes with wiring relay harness
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Let us know when you get ready for your LOKAR shifter, throttle cables, dipsticks, etc. Duff's is authorized dealer for LOKAR and their products will look great on there. Oh and we might have the billet pedals available by then also!

We also have the composite headlights in fluted and tribar design for $145. Kit comes with wiring relay harness

Thanks for the heads up. Actually, the Pony Express was my original inspiration for a hotrod Bronco over 25 years ago!
 

Attachments

  • ponyexpress72.jpg
    ponyexpress72.jpg
    17.5 KB · Views: 115
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Let us know when you get ready for your LOKAR shifter, throttle cables, dipsticks, etc. Duff's is authorized dealer for LOKAR and their products will look great on there. Oh and we might have the billet pedals available by then also!

We also have the composite headlights in fluted and tribar design for $145. Kit comes with wiring relay harness

Feel free to post up a couple links to those great items! :p
 

77bronco_ed

Bronco Guru
Joined
Jul 3, 2004
Messages
1,793
Well I mounted the spacer I machined for the Truxedo cover. It fit great and measures exactly the same corner to corner. It is 56" across by 42.5" front to back. I know it's not much progress, but it is another step in the right direction.

Any effort is progress! One small step leads to the next!

Keep it moving
 

77bronco_ed

Bronco Guru
Joined
Jul 3, 2004
Messages
1,793

Attachments

  • side_jpg.jpg
    side_jpg.jpg
    7.9 KB · Views: 92
  • rear_jpg.jpg
    rear_jpg.jpg
    5.2 KB · Views: 287
  • 19364786-764-1969-ford-bronco-prostreet-project.jpg
    19364786-764-1969-ford-bronco-prostreet-project.jpg
    84.5 KB · Views: 117
  • 19827015-621.jpg
    19827015-621.jpg
    111 KB · Views: 106

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
I'm looking for a post that showed Dale hidden hinge install as well as more on your dash windshield rake. I'm getting ideas again, in addition to giving up on the aftermarket Sheetmetal I bought. It just isn't worth the fight. Externally the fit can look fine, but the supports and everything else needs adjustment.

The core support alone, the radiator mounts were all off so that a stock radiator could not be installed. Then all 4 mounts had to be removed and shifted passenger side almost 1/2 inch.

The fenders look ok but the supports are all a little off.

The hood is not square either, all of this makes alignment quite a battle which is what I was trying to avoid.

So any picks of hidden hinge installs the dash mods for windshield rake as well as that bulkhead mod for mounting it straight up would be great.

Any body have some stock original uncut front fenders ?
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
I have a few install pics of the hidden hinges somewhere. I am on my IPod right now but will post tomorrow afternoon. I am up to my (_!_) between this project and my half cab restore at the Bronco Connection.
 
Top