• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Wheel seals for trailer axle

JWMcCrary

Contributor
Bronco Guru
Joined
Oct 14, 2004
Messages
5,001
Is this a standard trailer axle that somebody can give me a part# for the wheel seal? or tell me what to ask for at the parts house?

I was hoping to be able to get the seals before tearing it down and then finding them. I am about to pull this thing from MS to Akron Ohio in a couple weeks, would feel better if the bearings were freshly packed. Right now I'm in Ohio and the trailer is in MS.
 

Attachments

  • IMG_1036.jpg
    IMG_1036.jpg
    129.6 KB · Views: 41

NYLES

Bronco Guru
Joined
Aug 13, 2004
Messages
9,846
HA hA thats funny!!! pull one off send bradly for 4 seals while you pack the bearings....only way your gonna get the right ones is take one to napa
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,114
They are standard, but there are a lot of standards. Unless you know what axle you have you will have to take it apart and see what you need first. Off the top of my head I can think of about 4 different standard trailer bearing/grease seal sizes.
 
OP
OP
JWMcCrary

JWMcCrary

Contributor
Bronco Guru
Joined
Oct 14, 2004
Messages
5,001
They are standard, but there are a lot of standards. Unless you know what axle you have you will have to take it apart and see what you need first. Off the top of my head I can think of about 4 different standard trailer bearing/grease seal sizes.

Thanks, kinda what I expected.
 

TwoDalesDad

Bronco Guru
Joined
Jul 19, 2011
Messages
1,515
OR...You could do what my EX BROTHER IN LAW DID...Of Course They Snapped an Axle in the Middle of The Trip.....which....I Think my Sister didn't care for.....
 
Top