Broncofan76
Sr. Member
I finally bought a diversion 180 and have been welding a cart for my MIG and TIG machines (with a spot for a plasma one day). I built the cart both because I need a proper cart and also to see if i can get the hang of a TIG machine prior to working on a real project that actually matters. Things are going "okay" and when I mess up I generally know why and that's my goal.
I wondered if anyone had suggestions on what size tungston or type/size filler rod I'd use for 1/8" mild steel end caps. I've been using I have the 2x2 and 1.5x1.5" tubes cut on a 45 and I need to put some caps on em. These welds will be very visible and I'd like to get em right and not have to grind em off or down to make em presentable. any tips?
I've been using 3/32" ER7OS-2 rod and 3/32" Tungsten Electrodes
TIA
I wondered if anyone had suggestions on what size tungston or type/size filler rod I'd use for 1/8" mild steel end caps. I've been using I have the 2x2 and 1.5x1.5" tubes cut on a 45 and I need to put some caps on em. These welds will be very visible and I'd like to get em right and not have to grind em off or down to make em presentable. any tips?
I've been using 3/32" ER7OS-2 rod and 3/32" Tungsten Electrodes
TIA











