• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Hedman Shorty Hedders

ENDLIFE

Sr. Member
Joined
Nov 17, 2011
Messages
453
Has anyone successfully used these headers?
$_12.JPG
 

KyleQ

Bronco Guru
Joined
Apr 24, 2008
Messages
5,480
Good question - the drivers side will probably fit fine, but the fact that the factory manifold points down and this one points back may pose a problem.
 
OP
OP
ENDLIFE

ENDLIFE

Sr. Member
Joined
Nov 17, 2011
Messages
453
The passenger side only points slightly down; however, these are the closest I could find that resemble stock manifolds.
-351161705663999260.jpg
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Looks like a truck header. Maybe even an Explorer?
Don't know anyone that's tried them, but it'd be interesting to see if they fit.

Paul
 
OP
OP
ENDLIFE

ENDLIFE

Sr. Member
Joined
Nov 17, 2011
Messages
453
88400 Hedman Street Hedders. I'm in the process of killing all my exhaust leaks, I had to find out the hard way O2 sensors do not like long tube headers, so I'm trying to kill two birds with one stone. I'm wondering at this point where V-bands have been all my life.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Yep, O2 position is very important if you're running a pre-programmed ECM like the Ford factory computers.
If a self-learning or programmable type is what you're using, what was the issue?

Paul
 

Green '70

New Member
Joined
Jan 4, 2014
Messages
42
Loc.
Wylie, Tx
Summit site says for passenger cars, falcon, fairlane, maverick. $190 for 18 ga painted steel...#88408 is 14ga ceramic coated for $400 i an awesome price. They LOOK like they should fit. Could O2 bungs be added at the pipes just behind the header?
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
While I can certainly understand the allure of the $190 deal, I wouldn't gamble with my $400 just to save $70 bucks on an unknown.
Be great if they work of course, but if they don't you're on the hook for modifying them to fit or selling them on.
Not sure what the others are charging for their shorties right now, so only compared the price to ours.

Is the image guaranteed to be what you get for that part number? I know headers are usually better about that than most manufacturer's product lines, but just wanted to make sure.

Yes, the O2 bungs on the pipes just aft of the collector flange is typically how it's done. Puts it just a tad farther away from the rearmost exhaust port than optimal perhaps, but not by much, if at all, in most cases.

Paul
 
OP
OP
ENDLIFE

ENDLIFE

Sr. Member
Joined
Nov 17, 2011
Messages
453
My rig will start, idle, and drive around great for a while. Out of nowhere it will run like poo, not completely bad, but not good either. I'm also getting a code 41 for the passenger side O2 sensor. Another EB member informed me that it's because of the long tube starter killers I'm running, so I'm going to get rid of them to someone running a carb setup. Plus the $179 price tag is hard to beat.
Thoughts Donk?

@Green'70: When I get them I'll scout a nice spot for an O2 sensor. I would like to have the O2 bung in the header, but like anything with our rigs I'll know nothing till I do a mock up.
 

Green '70

New Member
Joined
Jan 4, 2014
Messages
42
Loc.
Wylie, Tx
The o2 bungs on the factory explorer pipes are aft of the manifolds so I think that should fly in our world too.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
...I would like to have the O2 bung in the header, but like anything with our rigs I'll know nothing till I do a mock up.

Ain't that the truth! Surprising sometimes how much room it "looks" like you have in the tunnel/firewall area, only to find it was all smoke-and-mirrors when you put an O2 in at just slightly the wrong angle.

Lots of people have experimented with Mustang shorties over the years for the same pricing reason. With varied and somewhat limited success.
But don't remember anyone saying they tried the regular car headers before. They sure look close though!
When comparing those to an EB-specific model, they almost look like they're too straight, and a bit far outward. Kind of the opposite of the Mustang versions. Like if they hit anything it will be the firewall. But just above the frame.

Like the Mustangs sometimes, maybe it could just down to a creative bit of welding by the exhaust shop once they're installed?
But like your O2 analogy above, there's really only one way to find out.
I'm just glad it's going to be your $200 bucks and not mine! ;D

Good luck.

Paul
 
OP
OP
ENDLIFE

ENDLIFE

Sr. Member
Joined
Nov 17, 2011
Messages
453
I would love to throw down for a set of Wildhorses4x4 shorties, but the fixed starving student budget keeps tweeking the nips. I'll post pics when I'm done.
 

Mountain Ram

Recovering Masshole
Joined
May 8, 2011
Messages
3,387
Loc.
Abingdon, VA
Street Performance USA price on the 88408 is $309 and Summit price matches and you can get their free shipping!

I am looking for a shorty for my crawler build to keep the exhaust away from the driveshaft going to the HP60... I read an old thread on Norcalbroncos where some tried them, but never saw anything about fitment.

As to the O2 sensors and long tubes, I am running the Hedman Elite 88418 long tube headers on my '75 with Mustang EFI 347 and have had no issues with the O2 sensors. Guess it may be a hit or miss??
 

Kyle.malone

Bronco Guru
Joined
Mar 9, 2006
Messages
3,077
Loc.
Norman, OK
I am running those headers. THe driver fits fine. The passenger needs to be modified. Pie cut it and turn it back in towards the cnter of the rig and fill back in with metal. It exits right on top of the frame rail. Quick mod and works.
 

dougsride

Contributor
Full Member
Joined
Dec 19, 2013
Messages
239
i am running a set of summit headers for a 89 f150 5.0 on my 75. engine is bone stock so flow / horsepower was not a concern for me, cheap was. driver side fit like a glove , no issues at all. passenger side i removed the cone flare off header and welded a slight angle exhaust elbow i found at advance auto to it. custom exhaust guy did the rest for me . ran a two into muffler with one 3 inch exit pipe. very clean and up out of harms way. but when i build my stroker motor i will probably go with a bc bronco set up.
 

70_Steve

Old Guy
Joined
Dec 13, 2002
Messages
8,317
My rig will start, idle, and drive around great for a while. Out of nowhere it will run like poo, not completely bad, but not good either. I'm also getting a code 41 for the passenger side O2 sensor. Another EB member informed me that it's because of the long tube starter killers I'm running, so I'm going to get rid of them to someone running a carb setup.
I'm not sure why someone would think that the O2 sensors won't work properly if mounted behind the collector on long tube headers. If you're running Ford fuel injection, the O2 sensors are heated, which would be one of the major concerns about non-heated (2-wire) O2 sensor placement.

I've been running my Ford EFI for about 4 years with the O2 sensors mounted behind the long tube header collectors without the first problem. I also ran O2 sensors in that same location on my LS1 Camaro for about 12 years with no problems.

I think you have gotten some mis-information, and have another problem, other than O2 sensor placement.
 
Top