• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Roll cage phone mount options?

admin

Administrator
Just your friendly, neighborhood webmaster...
Joined
Jan 1, 2001
Messages
38,896
Loc.
Phoenix, AZ
What's everyone using for mounting their phones to their rollbars?

I'm currently using this one, but since it's windshield mounted it shakes quite a bit. It's not that it drops the phone. It's actually very secure. But the shake can get so bad it's hard to read the screen.
phone mount 06.jpg

So I'm looking for something that mounts directly to the roll cage cross bar. Has anyone used this Steelie magnetic mount? It's a 2 piece unit. A small magnet disc attaches to your phone. Then a steel ball attaches to the vehicle. Looks interesting, but I'm concerned about 2 things; having a magnet permanently attached to my phone case and how secure the mount is when 4 wheeling. I'm wondering if the phone will swivel down out of position from the vibration of wheeling or highway travel.

http://www.amazon.com/Nite-Ize-STCK-11-R8-Steelie-Cellphones/dp/B00BAQKRHY

steelie.jpg 41oaDDP-HLL.jpg

I also found this Ram mount, which looks promising. I just can't tell if the strap that wraps around the tube will be large enough for my roll bar. It's made for bike handlebars.

http://www.amazon.com/RAP-SB-187-UN7U-Mount-Thunderbolt-Incredible-Smartphones/dp/B005EP84Q8

Image2.jpg

Any experiences on these or other options would be great. Thanks!
 

malonejy

Bronco Guru
Joined
Jul 21, 2001
Messages
1,032
Jon,

I've not used them yet but Ram makes mounts for just about everything. They look to be a good product.

James

Edit. I see you found one of the Ram systems on Amazon. Their actual website has a pretty good walk through of choosing the right product for your specific application. Hope this helps.
 

Mountain Ram

Recovering Masshole
Joined
May 8, 2011
Messages
3,387
Loc.
Abingdon, VA
The UTV mount says it will fit 1.5 to 3" with the strap, but that's over $60... To hold a phone.

Why are you trying to read th phone while driving?
 

miikee73

Shadetree Guru
Joined
Dec 14, 2010
Messages
3,551
Loc.
Aloha
First let me say I enjoy coming up with uses for things . This was a piece of rubber tubing and suction cups marketed for holding shampoo etc. in a fiberglass Motorhome bathroom. I just cut a short piece to try it out.It's steady and can move up,down ,to the side window. Ad this to the list of cheap mods.
 

Attachments

  • IMG_0084.jpg
    IMG_0084.jpg
    72.1 KB · Views: 187
  • IMG_0085.jpg
    IMG_0085.jpg
    99.2 KB · Views: 159
OP
OP
admin

admin

Administrator
Just your friendly, neighborhood webmaster...
Joined
Jan 1, 2001
Messages
38,896
Loc.
Phoenix, AZ
Why are you trying to read the phone while driving?
I knew someone would bring that up. ;D I use my phone for navigation and speedometer. I'm not texting or surfing CB.com or anything while driving.
 

Airmapper

Foolproofness Tester
Joined
Mar 15, 2006
Messages
1,710
Loc.
Bowling Green, KY
I use the RAM mounts and highly recommend them. However instead of what you linked to I use the more robust rubber coated ball and clamp type mounts for my handheld GPS units. I have several attachment ends I've collected over the years so I can attach to about anything now. Every time I got a new cradle for a different device, I got it with a attachment end I didn't have yet, and they all interchange.

I usually use the suction cup on the windshield, but they also have a bolt on end, I plan to install one on the Bronco dash so I can keep the unit lower, but so far the suction mount has been awesome. I'm not sure about reading a phone, but I've had no issues with reading my GPS while moving, it seems to limit the vibration well.
 

TAWL_BOY

Sponsor/Vendor
Full Member
Joined
May 26, 2013
Messages
336
Loc.
Friendswood, TX
RAM mounts are really nice.
________________________

I just picked up a couple of these:

IMG_0381.jpg

IMG_0382.jpg

They're like a Lifeproof Case that you attach to your dash, trans hump, center console and snap your phone in. And still be able to use the touch screen.

You can run you charge/media cable through the back of the case.

They're fairly universal, but an iPhone 5's home button is covered up.
My wife's 4S with a case works fine. It has a foam insert that makes an iPod classic work as well.
 

croft75

Sr. Member
Joined
Feb 9, 2007
Messages
781
I recommend the Ram mounts , I have one on my snowmobile handlebars for my gps and its never moved even with big hits. Also once you by the basic kit you can by different attachments so you can move it around.
 

sprdv1

Contributor
REBEL
Joined
Mar 8, 2007
Messages
81,996
Four Treks does have the GPS, Video camera mounts... but I don't see any ones for phone
 

SC74

Contributor
Bronco Guru
Joined
May 24, 2004
Messages
3,472
Another vote for Ram mounts. They do have a roll cage clamp, but it was basically two u straps... I need up screwing the mount to a non structural tube and then use the ball/socket to rotate etc. It doesn't move at all and is very sturdy.
 

Eoth

Bronco Guru
Joined
Mar 10, 2004
Messages
1,692
Cheap bastard option.... I have an OtterBox case and belt clip. The belt clip is very stout... I Bought a spare and "altered" it with my dremmel tool and removed the spring clip portion. I then added slots to rout a hose clamp.. I added a little bit of rubber and silicone to prevent it from rotating on the bar..
 

Rustytruck

Bronco Guru
Joined
Feb 24, 2002
Messages
10,872
I think you shoud tie your windshield to the cage and take the vibration out of the windshield frame.
 

jw0747

Bronco Guru
Joined
Nov 22, 2006
Messages
2,434
Loc.
San Antonio, TX
I use my Nexus 7 tablet for GPS and use one of these windshield Ram Mounts and it doesn't vibrate or come loose even on the roughest of terrain. My windshield vibrates a lot less than my roll cage so I'll keep it mounted there. If you decide to go Ram Mount be certain to get one that is spring loaded to secure you phone even if it costs more.

http://www.rammount.com/NewProducts/GoogleNexus7TabTiteMounts/tabid/4706/Default.aspx
 

MeyerzBronco

Sr. Member
Joined
Feb 7, 2010
Messages
390
Just put this in for the iPad. Bought all part on Amazon at a big discount. Search Ram's website then type in the parts number into Amazon. Talon Systems has some cool stuff as well.

enu6anyp.jpg
 
Top