• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

33" on 200 6cyl

NGABronco

Contributor
Always Learning
Joined
Feb 4, 2007
Messages
7,576
Loc.
N. GA now South Carolina
As others have said you'll probably be disappointed. The 200 just doesnt quite have the power to keep 33's turning effiecently thats why they came stock with 4.11 gearing and 28in tires. You've already taken some of the power away with the 31's While the RPM's may be up there they are needed with the smaller engine. Add any towing into the mix and performance suffers more with the larger tires.


What he said!! Now Phoneman, you said you wanted a 6 Pack, don't try to make it a V8!!!! LOL;D;D;D;D
 
OP
OP
P

Phoneman

Full Member
Joined
Apr 27, 2014
Messages
208
Loc.
South Carolina
hard to beat an old six cylinder ford. My dad had an old 78 Fairmont with a 200 that ran for dang near 330,000 without a hitch. My little brother finally did it in when dad let him use it to ride around the land. He kept the peddle on the wood all the time. It was smoking when he parked it but still purrin like those ford six's do.
 

NGABronco

Contributor
Always Learning
Joined
Feb 4, 2007
Messages
7,576
Loc.
N. GA now South Carolina
Great choice in tire selection! I had those exact same tires on my 76 just before I sold it. I did keep those tires as they will be going on my next build. Here is a pic of my old 76 with those skinny 33s on 15x6" steelies, 2" BL and 3.5" SL.

HaHa!!! Now Crawdad is a good man, but he's not saying what kind of engine he had????;D;D;D
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
hard to beat an old six cylinder ford. My dad had an old 78 Fairmont with a 200 that ran for dang near 330,000 without a hitch. My little brother finally did it in when dad let him use it to ride around the land. He kept the peddle on the wood all the time. It was smoking when he parked it but still purrin like those ford six's do.

All well and good but the 200 was ill suited for a bronco to begin with. Its good for a car that has better areodynamics and what 25in tires? Of course being able to keep the pedal to the wood all the time tells the story in itself.
Had ford done us right they woud have had the 240/300 6cyl as a option in the bronco instead of the 200.
But you have what you have and your the only one that has to be happy so our input is just that only input.
 

bmbm

Contributor
Sr. Member
Joined
Jun 16, 2007
Messages
762
six cylinder

I drove my 66/170 with 235/75/15 tires for years and enjoyed it just cause it was my first Bronco. I avoided any lengthy highway driving. Then came the 200 with 30's a very slight improvement. It always felt like it needed another gear (od) on flat stretches but I didn't find a reasonable way to get that done with the 170/200. The 300 is a great motor I have had several and have one now in my f150 but more work than I am interested in. Check out the 250 six it is an easy swap and you can use a five speed trans. The torque is close to what the 300 has and it is lighter and smaller.
Sounds like you enjoy the six check out classicinlines.com and fordsix.com for info on maintaining your six and performance parts.
 

blubuckaroo

Grease Monkey
Joined
Jun 11, 2007
Messages
11,796
Loc.
Ridgefield WA
gotta make do with whatcha got. Im lovin this thing even if I gotta put car tires on it.lol

That's my kind of thinking!;)
I'd just fix it up and drive it. I love to hear the sound of a six pulling.;) I guess it's that great solid lifter clicking that does it.
 
Top