• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Kentrol internet rumors?

hyghlndr

Contributor
Bronco Guru
Joined
Jan 19, 2009
Messages
5,264
Loc.
Hockessin, Delaware
Number 1 - What are the problems, yes I really want to know?

Number 2 - Let me know what you want to sell it to me for?

I had planned to buy on anyway down the road.
 

BluebroncoNC

Bronco Guru
Joined
Jul 30, 2007
Messages
1,768
Loc.
Asheville, NC
Turd AHOY! Like it or not, the point still stands. Unless you own and have PERSONALLY attemtpted to assemble a BD body and seek support from BD, your opinion on the product is without merit.

Problem is, if you post a negative opinion guys will rail on you, or point out flaws in the way you tried to handle it. However, posting a negative review without substantiation is just as bad if not worse. You're attempting to sully the character of the vendor without so much of a why... Oh, I'll send you a PM is weak, because your original post was not in the form of a PM. Sadly, that seems to be how this board operates, damned if you do, and damned if you don't.

Honestly, is there something wrong with saying, " I like product x, or I don't like product x and that is my opinion? Instead, someone offered an opinion, and someone else piped in and said, hold on, your opinion is not all that valid I have a different opinion. Probably could have been written to exclude the "hold on" point of view which personally calls into question the original posters positive view. Maybe next time, without the snarky personal comment?

-Captain Obvious.
 

Broncitis

Sponsor/Vendor
MEB Founder
Joined
May 18, 2004
Messages
5,283
Let me know what you want to sell it to me for?

I had planned to buy on anyway down the road.

There's an idea to solve the problem. Then maybe VT_Don can get one of those $5000 DIY metal body kits from the Bronco Graveyard. I'm sure those go together and fit square and true just like Legos! ;D

Unfortunatly, autobody (and fiberglass in particular) is not like dealing with precision machined or injection molded parts.
 

Glass Pony

Contributor
Bronco Guru
Joined
Feb 13, 2012
Messages
1,954
Loc.
Sussex County Delaware
I haven't built a bronco from all the vendor's tubs but have used some of their products on my build.
Here's my take.
I bought a Malotte style tub in the late 90's for my build, it was a royal pain in the ass.
I used WH one piece inserts, they took a little finesse to fit but turned out nice.
I used BD front flares, fit so well I didn't use welting.
 
OP
OP
swyman

swyman

Jr. Member
Joined
Sep 28, 2009
Messages
137
Loc.
Blissfield
Well looks like my options are either Bronco graveyard (only 30 min away) or Bronco Design. Terra Comp has not in 5 days returned my email so they're out. I really like the glassed in door inserts from BD and is probably the route I'll go. Thanks for all the replies both positive and negative. ....all good learning!
 

lowbush

Bronco Guru
Joined
Sep 13, 2010
Messages
1,807
Loc.
Summerland Key, FL
Well looks like my options are either Bronco graveyard (only 30 min away) or Bronco Design. Terra Comp has not in 5 days returned my email so they're out. I really like the glassed in door inserts from BD and is probably the route I'll go. Thanks for all the replies both positive and negative. ....all good learning!

I have emailed Bronco Graveyard 3 times about my order, they have not returned a single email, and have not shipped my order, the order was places several months ago. I would go with Bronco Design, it sucks to have to chase people.
 
OP
OP
swyman

swyman

Jr. Member
Joined
Sep 28, 2009
Messages
137
Loc.
Blissfield
Thanks for the info lowbush. I would not expect that from them, they are staffed really well so you would think they would have perfect customer service.
 

surfer-b

Contributor
Bronco Guru
Joined
Sep 7, 2006
Messages
3,013
I have not had any experience with any of the glass tubs, however I have seen a few of BD tubs in person and they were impressive. I would really consider one of these for 2 reasons
1: If the stock body had so much rust in it that the majority of it needs replacing
2: If I lived in an area that had a lot of winter, I could drive it and enjoy it without worrying about salt on the roads.
 

lowbush

Bronco Guru
Joined
Sep 13, 2010
Messages
1,807
Loc.
Summerland Key, FL
I would really consider one of these for 2 reasons

Before Mike sold BD, I was talking to him about doing a carbon fiber tub I really wish the new owners would consider doing carbon, vacuum bagging setups are dirt cheap and it would even reduce the cost of their fiberglass builds and reduce the weight of the finished product. Carbon cloth is not that much more expensive than fiberglass, it takes a little more labor to make sure you have a good looking weave layout but it's not terrible. If someone would do a carbon / kevlar body, it would put to rest the pros/cons or steel vs glass. I plan to carbon sheet parts of my glass body, but I would be first in line to pick up a carbon body if someone offered it. So much so, that I have considered building molds to pop out my own carbon body, the problem is I don't have a good body to work from and I am sure not going to use my Kentrol body to do it from.
 

broncodriver99

Bronco Guru
Joined
Jan 27, 2008
Messages
4,780
Loc.
Glen Allen, VA

Attachments

  • Merit-Badge_0004a-150x150.jpg
    Merit-Badge_0004a-150x150.jpg
    42.1 KB · Views: 273

Broncitis

Sponsor/Vendor
MEB Founder
Joined
May 18, 2004
Messages
5,283
Before Mike sold BD, I was talking to him about doing a carbon fiber tub I really wish the new owners would consider doing carbon, vacuum bagging setups are dirt cheap and it would even reduce the cost of their fiberglass builds and reduce the weight of the finished product. Carbon cloth is not that much more expensive than fiberglass, it takes a little more labor to make sure you have a good looking weave layout but it's not terrible. If someone would do a carbon / kevlar body, it would put to rest the pros/cons or steel vs glass. I plan to carbon sheet parts of my glass body, but I would be first in line to pick up a carbon body if someone offered it. So much so, that I have considered building molds to pop out my own carbon body, the problem is I don't have a good body to work from and I am sure not going to use my Kentrol body to do it from.


I mentioned this to Mike for years as well. I think I also mentioned it to Corey too, as well as suggesting they contact Jonathan at ICON to see if they would be interested. I am pretty sure some of his clientele would be ooood and awed by a carbon Kevlar body and would be more than willing to pay for it. A rust resistant Bronco would be a great thing when you are carrying your Bronco on the stern of your mega yacht in the salt air or beach cruising at your ocean front home or winter use for going to the ski resort in your mountain home.

Not to mention that it would be more cost effective to have a regular source of bodies which you can pretty much know what needs done to make fit each and every time for more predictable and consistant production.

Compare that to scouring the country to find a rust free Bronco, only to have it shipped in and still find rust or previous hacked repairs, then the time to dismantel and repair.

Plus it would leave real Broncos out on the market for more of the average guy to build (considering almost every other part on an ICON excpet the main tub is replaced). I originally heard they planned to use Dynacorn bodies, but those have never fully seen the light of day after years of promises from Dynacorn. I could see them marketing and getting a premium from their customers for USA made carbon Kevlar versus Tawain repop steel. Seems to me it could be a win win all around.

However, they may just do this for the VINs as well, but if so, I am not sure why I heard they were looking to use Dynacorn since that would put them in the same situation (100% new body AND new Art Morrison replacement frame, ala no original Bronco to claim).


Lowbush, can I interest you in a carbon Kevlar Bronco golf cart? ;D
 

Tedster100

Chairman of the Bored
Joined
Aug 25, 2010
Messages
1,762
I have a Kentrol tub my dad purchased in the mid-90's. Overall finish was pretty good, reinforcement was poor in my opinion. Seeing the internal frame Bronco Design incorporates I can say for sure that I would have been happier with their tub for that reason alone. The tub I have sat until about 2011 when I got serious about finishing the project. When I read the Kentrol installation instructions it had a addendum in it that referenced a problem with fitment. Something like "if you find that the hard top does not fit correctly please call for special instructions to correct the issue" Basically they knowingly sold bodies that had form or fitment issues.

Everything on my 73 is glass except for the windshield frame and it all took some work to achieve a proper fit, some pieces more than others. I have a Bronco Design hood and it is artwork, it's two panels put together so the inside is as nice as the outside. Very well built and fit great but it did take some time to fit the hinges, etc...

I spent many, many hours working the body, fitting the doors, grill, tailgate, dash, etc.. but in the end I don't think it was any more work than if I had removed and replaced the typical rusted panels with new steel ones. I'm happy with the fit and finish I achieved with the Kentrol body, BD hood and the doors, tailgate & grill that I picked up used and don't know the manufacturers. Most people are surprised that it's all glass which is a compliment and testament to the work put into the body. I don't believe that piecing together a steel body or installing a fiberglass one should be something that anyone would expect to be bolt on and go.

I'm with the others here, if there are issues please share and convey in a constructive way so that we can all be more informed and the builder aware of any issues that could potentially be fixed. Throwing out a comment about issues with a respected vendor and not detailing what they were really calls into question the means and methods you used and your skill level every bit as much as the problems with the product. Clear the air and state the issues.
 

Scoop

Contributor
Bronco Old Fart
Joined
Feb 1, 2006
Messages
11,122
Loc.
Cuchara, CO
Ted, as I recall your Bronco's fit is pretty nice. Great job considering the mix-match of body parts! ;D
 

Tedster100

Chairman of the Bored
Joined
Aug 25, 2010
Messages
1,762
Ted, as I recall your Bronco's fit is pretty nice. Great job considering the mix-match of body parts! ;D


Thanks, it did add to the time involved in getting everything to fit but it all worked out in the end. If I had it to do over (definite possibility in the near future, already have a rough quote from Bronco Design) I'd try to stick with the same vendor for everything. Still interested in hearing if there any issues, tips or tricks.

Someday I hope to retire to a shop as nice as yours!! You going to make the fall cruise?
 

Scoop

Contributor
Bronco Old Fart
Joined
Feb 1, 2006
Messages
11,122
Loc.
Cuchara, CO
Thanks, it did add to the time involved in getting everything to fit but it all worked out in the end. If I had it to do over (definite possibility in the near future, already have a rough quote from Bronco Design) I'd try to stick with the same vendor for everything. Still interested in hearing if there any issues, tips or tricks.

Someday I hope to retire to a shop as nice as yours!! You going to make the fall cruise?

Wish I could make the Fall Cruise - looks like Karl has a nice one planned. My next MEB event will likely be the 2016 Round Up 50th celebration.
 

Pearlcoat

Bronco Guru
Joined
Feb 17, 2008
Messages
1,294
I agree with Tedster. I have a Kentrol body, doors, top, tailgate and liftgate purchased in 1990. We had so much trouble with some of the fitment we have to pay others to do it for us. Several people who helped us, with knowledge of fiberglass work, said the mold used for our tub should have been destroyed and not used. The tub didn't even measure the same front to back on each side. That side, with lots of help, and an awesome paint job, it looks great now. I would not buy another one from Kentrol, if they were still selling tubs. And that is from personal experience.

I have personally met both the former owners and current owners of Bronco Design and can attest to the fact that they want nothing other than to produce quality products and have happy customers. As mentioned here previously, try to attend a show or go to their shop and see their work before you make up your mind.

Better yet, talk to the people who have bought and built their tubs for their thoughts.
 

clarrance

Bronco Guru
Joined
Mar 3, 2005
Messages
2,675
Lies!!!!!!! I got a new kentrol tub 3 years ago and love it! It didn't cost anything to get it to fit...actually the glass pieces went together almost effortlessly compared to new steel parts I have gotten. As far as quality...my Kentrol tub gets a A++ from me!

Hmm, I guess everyone who has had problems trying to make their Kentrol tub fit is lying.

There is a reason Kentrol is not making the tubs anymore, if they were so great and everyone was buying them I would think it would be profitable for them to keep making them.

With that being said, I have seen some very nice Kentrol Bodied Broncos, it more than likely took the owners a lot of time to get them that nice.
 
Last edited:

Kbpony

Sr. Member
Joined
Jan 31, 2012
Messages
386
I have a Kentrol tub I am currently installing. So far, the tub is great. Kentrol did a major re-work of their tub at one point, I believe mid-nineties. The earlier ones had some issues, but the later ones seem to be pretty high quality. I spoke with Kentrol this week, and it seems the owners are slowing down and getting out of all their glass products. This includes all Bronco, Scout, and Heep. I am sure BD's high quality products may have impacted Kentrol's Bronco parts sales, but probably unlikely to have affected the other two lines.
 
Top