I don't know what that means...
Power to the fuel level, oil pressure and water temp gauges comes from an Instrument Voltage Regulator (IVR) mounted on the back of the instrument cluster. The output of the (stock) IVR is a pulsed voltage, pulsing at something close to two pulses per second. That output of the IVR is daisy-chained to one side of the three gauges. The other side of the gauges is wired to the respective sending unit. The sending units vary resistance, with 73 ohms being 0% of scale, and 10 ohms being 100% of scale.
If any of those three gauges work, then the IVR is OK.
In the case of a Bronco with two fuel tanks, each with a sending unit, the "other" side of the fuel level gauge is wired to one of the Common terminals of a double pole double throw switch. The normally open and normally closed terminals of that half of the switch are connected to each of the two sendign units. The other side of the sending units are connected to frame ground.