• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Fuse Box Replacement?

Tram

Bronco Guru
Joined
Mar 21, 2005
Messages
1,203
Anyone used the Blue Sea brand fuse blocks?

My wiring harness in the '74 is good enough that I'm not really willing to rewire the entire Bronco.

That said, the fuse box is a bit of a wreck.

Thinking about replacing it with one of these.

Anyone been there, done that?
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Yeah, I've seen a couple of members here using them I think. Don't think there've been discussions about it recently, so you'd have to search pretty far back I bet. Maybe one of them will pipe up about it, but I think they seemed happy with them if I remember.
They're a nice setup either way, so if yours is trashed it's probably a good option.
Then again, just about anything would be a good option if you stop to think about it!

Which model are you contemplating? And going to try to keep it in the same general area as stock, to keep the wiring as simple as possible?

Paul
 
OP
OP
Tram

Tram

Bronco Guru
Joined
Mar 21, 2005
Messages
1,203
I had been considering picking up 2 of these and running one under the hood for accessories coming straight off the battery and running one somewhere in the cab to replace the factory unit.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Should be perfect. Especially when you're looking for somewhere to connect your fish-finder and depth-sounder. :cool:
Just don't ever use the Auto-Pilot feature on an EB!!!!! ;D

Should be good sizes for what we usually need on a Bronco. You going to update anything else too, like the alternator?
If running a separate large gauge wire from a high-output alt to the battery, you could repurpose the old charge wire to feed your new under-hood panel. And if you haven't done it already, maybe this is a good excuse to go with a bigger alt after all?
Just a thought.

Paul
 

snipes243

Bronco Guru
Joined
Oct 12, 2006
Messages
1,317
Loc.
Huntersville, NC
The blue sea fuse block is pretty nice. I just installed one as aux fuse has a nice fit and finish
ced5f58da4e3a0dbfa9b770faccbed86.jpg
 

Jdgephar

Bronco Guru
Joined
Sep 25, 2012
Messages
1,526
I used one for an aux fuse and for my fuel pump. Also used one to rewire a ski boat. Nice stuff, not cheap either (maybe 'cause I got it at a marine store).
 

Hurseyc

Full Member
Joined
Sep 23, 2012
Messages
178
Loc.
Waterloo, IL
I've been looking at boxes like this but I don't understand exactly how to wire it. Don't we need two separate inputs? Circuits 2a and 6? How would this work with only one hot input? I thought I had a decent handle on wiring but this confuses me.
 
OP
OP
Tram

Tram

Bronco Guru
Joined
Mar 21, 2005
Messages
1,203
I've been looking at boxes like this but I don't understand exactly how to wire it. Don't we need two separate inputs? Circuits 2a and 6? How would this work with only one hot input? I thought I had a decent handle on wiring but this confuses me.

I'll be 100% honest..

Wiring it up as an aux box, I totally get. Hot in, ground out, everything else in the middle (unless I'm wrong, if so, someone please let me know. LOL)

As for replacing the stock box, I'm still having to read a bit. Not sure, I figured once I got out there, it'd be intuitive.. LOL
 
Top