The only real technical downside to rubbing the radius arms tommy, is that you lose some turning radius. Rubbing the body is a different ballgame, but the radius arms are not so bad.
To me though, losing the turning radius is actually a big enough deal that I'd always try to get it back with things like bent radius arms (aftermarket, not the stock ones!) and such.
But, as bad as it sounds, you're usually not actually hurting anything but the paint on the radius arm. And the rubbing can be eliminated by either turning out the steering stops so that they hit before the tire does, or just not turning that far.;D
Since you've already decided to go with 8" wheels, you're in better shape for the body clearance, and the looks department (personal preference of course), but perhaps very little discernible difference in the radius arm issue.
The reason is backspacing. If an 8" and a 10" wheel both have the same backspacing, they're locating the tire's inside sidewall in virtually the same place in regards to the arms.
There is the very slight variation caused by the wheel width of course, but you'd be hard pressed to even measure that change. While it's quite visually noticeable, our eyes are more sensitive to the surroundings as they relate to what we're looking at. But the tape measure doesn't lie. Not a big change.
In fact, depending on the design of the tire and air pressure, you might actually GAIN some radius arm clearance with the 10's. Not enough to change my mind on rim sizes, but still a factor.
I never remember to get better pics of "Gramps" (the WH Blue '76 w/2.5" lift), but it's got 33x12.50's on 8" wheels and looks great. Ran the same tires at stock height for quite awhile with almost no rubbing.
I really like the 10.50's in some cases, but as long as you stick with the 8" wide wheel, I do like the look of the 12.50's as well.
Paul